916 swing arm

  • dela1340
  • Topic Author
  • Visitor
01 Mar 2012 19:20 #507246 by dela1340
916 swing arm was created by dela1340
Ok first post sitting at home trying to fig out how to fit Ducati 916 swing arm on my z1000 seems to be 1/2" wider than frame any ideas thanks Dave Del

Please Log in or Create an account to join the conversation.

  • lemo32
  • Offline
  • User
  • The Price of Cool aint cheap
More
01 Mar 2012 19:58 #507248 by lemo32
Replied by lemo32 on topic 916 swing arm
Sawzall, big hammer, welder! :laugh:
1979 kz 1000 06 katana 750

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
01 Mar 2012 20:25 - 02 Mar 2012 18:36 #507252 by mark1122
Replied by mark1122 on topic 916 swing arm
just cut the frame ang insert a bottle jack. :)
there is a member her that has done a nice job with a triumph sssa.
kzrider.com/forum/11-projects/348089-78-...r?limit=20&start=120
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Last edit: 02 Mar 2012 18:36 by mark1122.
The following user(s) said Thank You: porchev914

Please Log in or Create an account to join the conversation.

  • porchev914
  • Offline
  • User
  • Whats that? Half of my swingarm is missing?!?!?
More
01 Mar 2012 23:35 #507302 by porchev914
Replied by porchev914 on topic 916 swing arm

lemo32 wrote: Sawzall, big hammer, welder! :laugh:


What he said :laugh:

1/2" is doable. Duc arms are designed to be bolted to the engine, so you'll have to fill that gap between the pivot. If you have any questions, I'll do my best to help you along. Good luck!
Thanks for the plug Mark ;)
FRANKEN Z!
1978 KZ1000 A2A with 08'Speed Triple SSSA and '06 GSXR1000 front end

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links