- Posts: 14
- Thank you received: 0
swingarm question?
- kzrider77
- Topic Author
- Offline
- User
Less
More
09 Mar 2012 02:13 #508692
by kzrider77
swingarm question? was created by kzrider77
what is a fair price to pay for a swingarm big enough to fit 180-200 tire, and prep for install with shock mounts installed on my 77kz? Asking because I am unable to do the work my self, and cant afford being rip off
Please Log in or Create an account to join the conversation.
- Zedone
- Offline
- User
Less
More
- Posts: 397
- Thank you received: 14
09 Mar 2012 03:38 #508699
by Zedone
1977 KZ1000A1
1977 KZ1000A1 (Superbike Project)
1969 Chevrolet C/10 Short Fleet
Replied by Zedone on topic swingarm question?
You might want to consider a swingarm off of a ZRX . A 180-200 tire shd. fit in there if that's what you want. Hopefully some members will chime in that have done that mod (I know there are several guys who are running ZRX arms on their bikes here)
You will have to address the upper shock mounts, the swingarm pivot, the stock frame rear brake pedal pivot arm and I think the rear brake master cyl. Unless your running rearsets and even then you may have to do some tweeking to your rearsets. And the rear wheel alinement & chain clearance. I really like the look of the ZRX arm and thought of doing it to my 2nd bike
If you go for a new aftermarket swingarm your looking at @ $700-$800 to well over a few grand. Make sure you give them lots of info on your bike and what wheels your running ect. as I've read some real horror stories about guys having fitment issues after they receive the new custom arms.
You will have to address the upper shock mounts, the swingarm pivot, the stock frame rear brake pedal pivot arm and I think the rear brake master cyl. Unless your running rearsets and even then you may have to do some tweeking to your rearsets. And the rear wheel alinement & chain clearance. I really like the look of the ZRX arm and thought of doing it to my 2nd bike
If you go for a new aftermarket swingarm your looking at @ $700-$800 to well over a few grand. Make sure you give them lots of info on your bike and what wheels your running ect. as I've read some real horror stories about guys having fitment issues after they receive the new custom arms.
1977 KZ1000A1
1977 KZ1000A1 (Superbike Project)
1969 Chevrolet C/10 Short Fleet
Please Log in or Create an account to join the conversation.
- Zedone
- Offline
- User
Less
More
- Posts: 397
- Thank you received: 14
09 Mar 2012 06:06 #508703
by Zedone
1977 KZ1000A1
1977 KZ1000A1 (Superbike Project)
1969 Chevrolet C/10 Short Fleet
Replied by Zedone on topic swingarm question?
You may be interested in this for your bike kzrider77. These are available through American Classics, they are made in Germany, will handle a 160 tire, chrome plated steel, $595.00 US
1977 KZ1000A1
1977 KZ1000A1 (Superbike Project)
1969 Chevrolet C/10 Short Fleet
Attachments:
Please Log in or Create an account to join the conversation.
- andy9802gt
- Offline
- User
- If it tastes that good, eat it yourself.
Less
More
- Posts: 704
- Thank you received: 18
09 Mar 2012 06:47 #508704
by andy9802gt
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Replied by andy9802gt on topic swingarm question?
There is more involved in fitting a 180 than just buying a swinger big enough. There's offset sprockets, clearancing the frame most likely for the chain to clear, doing a 530 conversion, new rear wheel, figuring out the spacing on the rear wheel and all the other little things that spring up on the way.
'78 KZ1075 LTD
stage 1 head by Larry Cavanaugh
race built crank by John Pearson
Mikuni rs34's
k410 cams
back cut tranny
8" over D&G swinger
proving once again that age and treachery is better than youth and enthusiasm
Please Log in or Create an account to join the conversation.
- les holt
- Offline
- Vendor
Less
More
- Posts: 1635
- Thank you received: 288
09 Mar 2012 07:16 - 09 Mar 2012 07:21 #508705
by les holt
Replied by les holt on topic swingarm question?
Try $400, made to fit, with new bearings installed and powdercoated in what ever length you want. $50 more gets chrome moly axle to suit. :whistle:
Les
Les
Last edit: 09 Mar 2012 07:21 by les holt.
Please Log in or Create an account to join the conversation.
- ramtough_63
- Offline
- User
09 Mar 2012 10:09 #508716
by ramtough_63
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art
1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes...
Replied by ramtough_63 on topic swingarm question?
Swingarm made for a KZ by Various companies 4-700.00 used wheel 100.00-300.00 offset sprocket 90.00
beaings etc..80.00 tire 180-280.00
Additional Probabillity 530 Chain conversion rear sprocket 40-80.00 Chain 80.-200.00 rear brake caliper and mounting hardware 40.00-200.00 The list is aht I can think of
I had a guy offer me a complete set up out of california 200 tire bolt on set up for 700.00 he said he had over 1400.00 in it I believe him (chome swinger wheel)
I spent countless hours since I am on a modest budget scouring ebay and craigs list for my mod if I hadnt gone with the mono shock conversion my cost would've been around 600.00 plus shock mounts in swingarm wheel tire brakes sprockets chain etc...
my cost was offset considerably by selling my take off parts but i also paid alot of addtl shipping charges by piece mealing my parts.
I think you could probably get a swingarm from one of the guys on here and be riding with 1st class stuff under 1000.00
beaings etc..80.00 tire 180-280.00
Additional Probabillity 530 Chain conversion rear sprocket 40-80.00 Chain 80.-200.00 rear brake caliper and mounting hardware 40.00-200.00 The list is aht I can think of
I had a guy offer me a complete set up out of california 200 tire bolt on set up for 700.00 he said he had over 1400.00 in it I believe him (chome swinger wheel)
I spent countless hours since I am on a modest budget scouring ebay and craigs list for my mod if I hadnt gone with the mono shock conversion my cost would've been around 600.00 plus shock mounts in swingarm wheel tire brakes sprockets chain etc...
my cost was offset considerably by selling my take off parts but i also paid alot of addtl shipping charges by piece mealing my parts.
I think you could probably get a swingarm from one of the guys on here and be riding with 1st class stuff under 1000.00
1978 KZ1000 A2
Thrown Together To Ride Til Winter
Facebook Page
Free Range Custom Art
1982/83 750R/GPZ
1984 Goldwing 1200 Interstate
1982 Yamahopper QT50
Previous
2 79 HD sporty XLH
02 HD FLSTS Heritage
60's HD Hummer
70's Honda 550 Four
70 Yamaha 100
and various enduros dirtbikes minibikes...
Please Log in or Create an account to join the conversation.
- les holt
- Offline
- Vendor
Less
More
- Posts: 1635
- Thank you received: 288
09 Mar 2012 17:09 #508765
by les holt
Replied by les holt on topic swingarm question?
I figured mine, with just parts I'm in just over $1400 and that is putting the 2010 ZX6 frontend, brakes, wheels and tires with my arm and that includes what I get for a twin shock arm ready to go. Getting the back wheel and brake setup is fairly cheap, it was getting the front forks with matching front wheel and brake setup that cost.
Les
Les
Please Log in or Create an account to join the conversation.
- kzrider77
- Topic Author
- Offline
- User
Less
More
- Posts: 14
- Thank you received: 0
10 Mar 2012 04:08 #508844
by kzrider77
Replied by kzrider77 on topic swingarm question?
You guys are the best, i am very thankful for this sit and the info.
Please Log in or Create an account to join the conversation.
- z1kzonly
- Offline
- User
- Sustaining Member
Less
More
- Posts: 2892
- Thank you received: 542
10 Mar 2012 11:34 #508870
by z1kzonly
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Replied by z1kzonly on topic swingarm question?
This would have worked great for you. Don't know if you want to go this extreme for the street.
But it had the chromolly swing arm, 5/8 offset & bearing plate. 17/45 ratio gearing 530 size.
Clean lowered front end. Same mag wheel, LTD chrome fender.
It also had a raked neck with NY State title. You could have bolted all your stuff on to this chassis.
This one could have been had for $600 off of ebay last month.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&i...ageName=STRK:MESE:IT
But it had the chromolly swing arm, 5/8 offset & bearing plate. 17/45 ratio gearing 530 size.
Clean lowered front end. Same mag wheel, LTD chrome fender.
It also had a raked neck with NY State title. You could have bolted all your stuff on to this chassis.
This one could have been had for $600 off of ebay last month.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&i...ageName=STRK:MESE:IT
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Please Log in or Create an account to join the conversation.