take a look so far

lots of mods,coils,blue headlight,barend mirrors,gold chain,stage 3 carb kit,kirker 4-1,dyna 3000 ignition,plug wires, front braided lines,81 sr650 motor, ,92 gsxr 750 fonr end, rear disk conversion, kawasaki 750 swing arm with 16" rim,taperd steering bairings,chome master-brake handle, acewell guage. header rap.
new paint comming and soon to be polished 78 650 motor


I installed the 1992 gsxr 750 front end on my bike, but i would like to do away with the fork mount handle bars
and get the kind that mount on top of the triple t, but my triple doesnt have a place to bolt on the handlebars.

do they make a set of risers that can be bolted onto the top of my triple?

also take a look at my front tire-rim, any suggestions on a differnt rim/tire that would mount on - forks? gsxr 1000? i would like a bigger profile.

bottom line i like the gsxr triple/ fork conversion but i want a better stearing system with more height? how about a differnt fork-rim-tire-rotor-caliper that would work with the 92 750 triple?

or do you think installing handlebars on top with risers would help with low riding postion and handleing?

what would you do with this front end. the rear rim is a 16" 750 ltd disc conversion
the front is a 17inch rim.

Nice work. Roy

Looks great man

from what ive read the 1000 gsxr forks same era are 1.5 to 2 inches longer

i need them to lift this one a bit too

Looks great. How did it go hooking up that Acewell? I just ordered one myself. Is it a pretty simple process? How about calibrating it?

well i baught it with acewell on it so i cant realy help on that
sorry

i still have yet to calibrate with new fron end

I like what you have done great job, see thats what i want to do with mine, how you have handlebars up top instead of on forks,
i think i will have to get some risers that I can drill tap and install on the top ot triplet

would I be able to get a gsxr 1000 front end that would mount right into my 750 triple?

i used the clamps from an old triple top with single bolt from the bottom and drilled the top gsxr clamp , i had it drilled pre spaced to go with a harley riser setup for 1 inch bar but i havent found a cheap set of 1 inch controls yet