master cylinder like this

More
06 May 2012 12:09 #520175 by sinbad85
Replied by sinbad85 on topic master cylinder like this
i just ordered some braided lines....
one to go from mc to standard splitter....
then 2 from splitter to caliper....
super easy.....nevertheless time consuming....
my braided lines also came with all new banjo's plus crush washers....

you could even do without the splitter.....and run 1 line from the m/c down to the (r) caliper with a double banjo then run another braided line off the (r) double banjo to the (L) caliper.....

boom!!!!

weight saving too because then u can ditch the splitter....

ride safe.......ride another day

Please Log in or Create an account to join the conversation.

More
06 May 2012 14:53 #520212 by Reichmanner
Replied by Reichmanner on topic master cylinder like this

sinbad85 wrote: i just ordered some braided lines....
one to go from mc to standard splitter....
then 2 from splitter to caliper....
super easy.....nevertheless time consuming....
my braided lines also came with all new banjo's plus crush washers....

you could even do without the splitter.....and run 1 line from the m/c down to the (r) caliper with a double banjo then run another braided line off the (r) double banjo to the (L) caliper.....

boom!!!!

weight saving too because then u can ditch the splitter....




Where did you order your braided lines from?

1981 kz750 ltd (Project BOB)
1982 kz750 Spectra (Project Street Fighter)

Please Log in or Create an account to join the conversation.

More
07 May 2012 00:33 #520408 by sinbad85
Replied by sinbad85 on topic master cylinder like this
i just went to ebay.....
searched custom braided lines.....
i got 4 lines.....(1 extra incase i ever just want to run a single disc)
for about 90 bucks.....
not the cheapest>>> but i live in sydney so its much cheaper than i could have got here...
burrill

ride safe.......ride another day

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum