- Posts: 3
- Thank you received: 0
Triple tree tops
- The1stKZ
- Topic Author
- Offline
- User
Less
More
01 Jun 2012 14:44 #526296
by The1stKZ
Triple tree tops was created by The1stKZ
Hey, I have a 1980 kz750 ltd and my tree top has the risers built in. I have 1" bars that I want to put on so I was wondering if there were any other triple tree tops that have risers that can be swapped out that would fit my kz. Also, If there aren't any other tops, could i grind out the existing top to fit a 1 inch bar? Thanks!
Please Log in or Create an account to join the conversation.
- 531blackbanshee
- Offline
- Vendor
Less
More
- Posts: 7447
- Thank you received: 797
01 Jun 2012 17:49 #526307
by 531blackbanshee
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Replied by 531blackbanshee on topic Triple tree tops
prolly hard to find a tree that would fit that was already one inch,(being as h-d's are about the only bikes with factory one inch bars).
could cut the one inch bars out in the center where they clamp and slide some heavy walled 7/8's inch tubing in there and weld it all back up.
otherwise you will need to get the triple and the clamps mnachined out for the one inch bars.
hth,
leon
could cut the one inch bars out in the center where they clamp and slide some heavy walled 7/8's inch tubing in there and weld it all back up.
otherwise you will need to get the triple and the clamps mnachined out for the one inch bars.
hth,
leon
skiatook,oklahoma 1980 z1r,1978 kz 1000 z1r x 3,
1976 kz 900 x 3
i make what i can,and save the rest!
billybiltit.blogspot.com/
www.kzrider.com/forum/5-chassis/325862-triple-tree-custom-work
kzrider.com/forum/5-chassis/294594-frame-bracing?limitstart=0
Please Log in or Create an account to join the conversation.
- blipside
- Offline
- User
Less
More
- Posts: 14
- Thank you received: 0
06 Jun 2012 14:12 #527254
by blipside
Replied by blipside on topic Triple tree tops
Have you looked at cutting the risers off, grinding everything flat, & then drilling holes for aftermarket risers?
Please Log in or Create an account to join the conversation.