- Posts: 60
- Thank you received: 0
ass end movement?
- fizzer_$tfighter
- Topic Author
- Offline
- User
- YAMASAWKI MAN
Less
More
12 Jun 2012 10:23 #528468
by fizzer_$tfighter
82 KZ 1000 J Model
ass end movement? was created by fizzer_$tfighter
Ok so when I'm at hwy speed I get a lot of jumping around?
Im guessing input error or suspension
I have a 130 rear tyre. And what seems to be stock rear suspension
Im guessing input error or suspension
I have a 130 rear tyre. And what seems to be stock rear suspension
82 KZ 1000 J Model
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7585
- Thank you received: 2241
12 Jun 2012 10:40 #528479
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic ass end movement?
If you mean there is a lot of vertical movement, then it is likely bad shocks. If they are still the factory units,then there is a 99.9% chance that they are needing replacement.
If the movement is horizontal, it could be bad shocks, improperly adjusted shocks, bad swingarm bearings/bushings, bad steering stem bearings, a bad tire, or improper tire inflation.........
If the movement is horizontal, it could be bad shocks, improperly adjusted shocks, bad swingarm bearings/bushings, bad steering stem bearings, a bad tire, or improper tire inflation.........
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
The following user(s) said Thank You: wireman, fizzer_$tfighter
Please Log in or Create an account to join the conversation.
- fizzer_$tfighter
- Topic Author
- Offline
- User
- YAMASAWKI MAN
Less
More
- Posts: 60
- Thank you received: 0
12 Jun 2012 10:54 #528482
by fizzer_$tfighter
82 KZ 1000 J Model
Replied by fizzer_$tfighter on topic ass end movement?
Yeah I feel like its horizontal movement.
Ill try checking the steering stem and swing arm bushings first.
I think the tie is good on inflation, maybe bad balance?
I thought maybe it was just such a thin tyre,but nobody else has had the problem from that...
Is there a ”easy” swap to put a wider wheel on?
A far as suspension, I bought the bike with the suspension stiff as sin.
The PO was a much larger then myself.
I knocked the back down 2 or 3 from all the way up.
Could there be too much/little air in the forks causing it?
Ill try checking the steering stem and swing arm bushings first.
I think the tie is good on inflation, maybe bad balance?
I thought maybe it was just such a thin tyre,but nobody else has had the problem from that...
Is there a ”easy” swap to put a wider wheel on?
A far as suspension, I bought the bike with the suspension stiff as sin.
The PO was a much larger then myself.
I knocked the back down 2 or 3 from all the way up.
Could there be too much/little air in the forks causing it?
82 KZ 1000 J Model
Please Log in or Create an account to join the conversation.
- Medina
- Offline
- User
Less
More
- Posts: 271
- Thank you received: 8
12 Jun 2012 11:02 #528483
by Medina
yes, absolutely check the correct steering stem adjustment.
thinking tire inflation is correct is.......not, check it. go to manufactures website and follow their guidelines. I screwed with the pressure on mine for days. Finally ironed out all the bugs...I think...in my KZ, smooth ride now
do not put on a bigger tire than is mentioned in the manual. period.
yes, certainly, check the fork air, and DO IT the right way, or risk blowing out those seals.
Spend an hour reading here, and you'll find I had the same problems and the journey I took to fix it. Its likely something very very simple, or a combination of things.
1981 KZ1100 Vetter "Luminous Navy Blue" DAMN YOU COLOR CODES!
Medina, Oh
My Bike Thread
www.kzrider.com/forum/10-new-members/469298-from-ohio
Replied by Medina on topic ass end movement?
fizzer_$tfighter wrote:
Ill try checking the steering stem and swing arm bushings first.
I think the tie is good on inflation, maybe bad balance?
Is there a ”easy” swap to put a wider wheel on?
I knocked the back down 2 or 3 from all the way up.
Could there be too much/little air in the forks causing it?
yes, absolutely check the correct steering stem adjustment.
thinking tire inflation is correct is.......not, check it. go to manufactures website and follow their guidelines. I screwed with the pressure on mine for days. Finally ironed out all the bugs...I think...in my KZ, smooth ride now
do not put on a bigger tire than is mentioned in the manual. period.
yes, certainly, check the fork air, and DO IT the right way, or risk blowing out those seals.
Spend an hour reading here, and you'll find I had the same problems and the journey I took to fix it. Its likely something very very simple, or a combination of things.
1981 KZ1100 Vetter "Luminous Navy Blue" DAMN YOU COLOR CODES!
Medina, Oh
My Bike Thread
www.kzrider.com/forum/10-new-members/469298-from-ohio
The following user(s) said Thank You: fizzer_$tfighter
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Offline
- User
- New and improved - extra strength
Less
More
- Posts: 8726
- Thank you received: 235
12 Jun 2012 11:46 #528494
by trianglelaguna
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Replied by trianglelaguna on topic ass end movement?
tire prssure correct
good /better rear shocks
avon tires
and enjoy
good /better rear shocks
avon tires
and enjoy
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
The following user(s) said Thank You: fizzer_$tfighter
Please Log in or Create an account to join the conversation.
- fizzer_$tfighter
- Topic Author
- Offline
- User
- YAMASAWKI MAN
Less
More
- Posts: 60
- Thank you received: 0
12 Jun 2012 12:02 #528500
by fizzer_$tfighter
82 KZ 1000 J Model
Replied by fizzer_$tfighter on topic ass end movement?
I ”think” means the last time I checked (last week) it was correct.
And I didn't say tire, I said wheel.
Im looking to getting a wider rear ”wheel” so I can put a bigger tire on.
This is my cruising bike, I want it to look good, not worried about setting record lap times in the twisties.
As far as ”correct” steering stem adjustment, what are you referring to?
I meant checking that it was greased and tight.
The air in the forks is a real bitch because I haven't found a good hand pump with gauge. I just have my soccer ball pump and a tire pressure gauge.
And what avon tires you use?
And I didn't say tire, I said wheel.
Im looking to getting a wider rear ”wheel” so I can put a bigger tire on.
This is my cruising bike, I want it to look good, not worried about setting record lap times in the twisties.
As far as ”correct” steering stem adjustment, what are you referring to?
I meant checking that it was greased and tight.
The air in the forks is a real bitch because I haven't found a good hand pump with gauge. I just have my soccer ball pump and a tire pressure gauge.
And what avon tires you use?
82 KZ 1000 J Model
Please Log in or Create an account to join the conversation.
- Street Fighter LTD
- Offline
- Moderator
- TURBO, Its Better to be Blown than Injected
Less
More
- Posts: 4949
- Thank you received: 2071
12 Jun 2012 12:04 #528501
by Street Fighter LTD
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
Replied by Street Fighter LTD on topic ass end movement?
Assume Nothing,
Check Everything !!!!!
Check Everything !!!!!
Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: fizzer_$tfighter
Please Log in or Create an account to join the conversation.