KZ1000 front fork help to stiffen up front end?

More
14 May 2013 18:28 #587421 by Xspecsx
the race tech springs seem like a quick fix and the price isnt too bad, that might have to happen in the next week

Jerred Kincaid
Tattoo Artist
The Holy Mackerel
196 Forbes Ave
Saint Paul, MN 55102

Please Log in or Create an account to join the conversation.

More
14 May 2013 18:31 #587422 by 650ed
When you measured the fork oil level from the top of the inner fork tube how far from the top was the fork oil, and did you measure with the front wheel off the ground and the forks fully extended? Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
14 May 2013 19:00 #587431 by Xspecsx
i didnt measure the oil after putting it in, i measured it with a large plunger syringe to 310cc and injected it into the top then replaced the spring and put the cap on. the bike has no center stand and i dont have a jack for bikes, in order to get the front wheel off the ground during this procedure...options?

Jerred Kincaid
Tattoo Artist
The Holy Mackerel
196 Forbes Ave
Saint Paul, MN 55102

Please Log in or Create an account to join the conversation.

More
14 May 2013 19:09 #587432 by CruisingRam
Replied by CruisingRam on topic KZ1000 front fork help to stiffen up front end?
I have used them on personal and customer bikes many times and they are totally worth the money

1975 Z1 B 900- soon to be heavily modded
Pahoa, Hawaii is my new hom
I am working hard to save up the shipping money to get my shop opened here in Hawaii
I hate electrical stuff.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum