Will these go on my 76 KZ900?

More
29 Jun 2013 18:17 - 29 Jun 2013 18:28 #594358 by Sactown900
Will these go on my 76 KZ900? was created by Sactown900
Found these for $50 each in Auburn, CA.

If they fit my bike (and no one bought them this weekend) I told the Honda Cafe Bike shop owner I might come buy them. It says Kawasaki on the rims. He did not know what year Kawi they went to. He had some sick Cafe's on display.




Attachment DSCF5041.jpg not found



Attachment DSCF5042.jpg not found

Attachments:
Last edit: 29 Jun 2013 18:28 by Sactown900.

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Offline
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
29 Jun 2013 23:08 #594383 by Street Fighter LTD
Replied by Street Fighter LTD on topic Will these go on my 76 KZ900?
Look like a pair of 77 or 78 LTD mags. Painted


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn
The following user(s) said Thank You: Sactown900

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • Offline
  • User
  • New and improved - extra strength
More
29 Jun 2013 23:12 #594385 by trianglelaguna
Replied by trianglelaguna on topic Will these go on my 76 KZ900?
could be...they would fit but the swingarm and rear brake need to be changed...

1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
The following user(s) said Thank You: Sactown900

Please Log in or Create an account to join the conversation.

More
30 Jun 2013 13:33 #594469 by roy-b-boy-b
Replied by roy-b-boy-b on topic Will these go on my 76 KZ900?
Could have come off a 1980 Z1Classic. If you can fab good they will fit. You will have to convert to rear disk and change your battery box to one that the battery lifts out the side. Also weld a bracket to the frame for a rear master cylinder since this is a disk brake wheel.

1979 LTD Street Fighter.1977 KZ1000
The following user(s) said Thank You: Sactown900

Please Log in or Create an account to join the conversation.

More
30 Jun 2013 17:02 #594499 by Sactown900
Replied by Sactown900 on topic Will these go on my 76 KZ900?

roy-b-boy-b wrote: Could have come off a 1980 Z1Classic. If you can fab good they will fit. You will have to convert to rear disk and change your battery box to one that the battery lifts out the side. Also weld a bracket to the frame for a rear master cylinder since this is a disk brake wheel.



Thanks folks. I have to install the rebuilt carbs and fuel lines, so I guess I'll leave it "old and stock," until I see how the 90,000 mile engine runs.

Please Log in or Create an account to join the conversation.

  • trianglelaguna
  • Offline
  • User
  • New and improved - extra strength
More
01 Jul 2013 01:22 #594550 by trianglelaguna
Replied by trianglelaguna on topic Will these go on my 76 KZ900?
smart move...amny of us have bought rims...only to have them sit and gather dust while more pressing things pop up ,or riding is to good to start messin with things.....50 bucks a pop is ok...but some hardware may be needed still...spokes are cool....complete mags and hardware can be found on fleabay for cheap any day of the week and if you wacth for a while you can get the brakes and stuff with em package deal cheap.....

1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
The following user(s) said Thank You: Sactown900

Please Log in or Create an account to join the conversation.

More
01 Jul 2013 01:50 #594552 by Sactown900
Replied by Sactown900 on topic Will these go on my 76 KZ900?
There are some SICK bikes on this sight. Lots to dream about.

Please Log in or Create an account to join the conversation.

More
01 Jul 2013 08:40 #594572 by roy-b-boy-b
Replied by roy-b-boy-b on topic Will these go on my 76 KZ900?
I should have said,"a battery that comes out of the top".

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum