new guy with a few rear swing arm and set up quest

531blackbanshee wrote: i would remove the upper brace and weld an under brace on,add the dual shock brackets and it is a bolt in deal after the custom work that accepts a 99-07 busa rear wheel brake etc...

leon

Find a '97-03 Gsxr600 arm. It should be virtually identical to the Busa's but lacks the top brace to begin with.

Later, Doug

Any pics of a bushing setup that's needed..... I got a swing arm free .......so I have the wheel, brakes and swing arm.........I'm going to tackle this over the winter..........

What about the drive sprocket and the off set... I was told I need a drive support kit because of the offset on the bussa wheel

mrvoorhees wrote: hell all i have a 1982 kz1000 that i would like to get stretched. i have a 2004 factory gsxr1300 rear wheel complete with sprocket, axle and rotor.

with this wheel and lets say a stock kz swing arm that has been extended whats my option for brakes. i would love to use the stock brakes because when i have the stock kz swing arm extended i can just have those mounting locations moved around and can also save money and time looking for parts.

if this wont work what will i need to look for . i have found a couple of gsxr swing armes already extended or even a after market swing army built for the kz

i think my biggest issue is the rotor on the busa wheel is not going to match up with the stock kz brake caliper

Those parts are not from a 2004 busa. Iam running a 99-03 busa rear wheel and brakes. The caliper do not look like mine. After 2003 they changed the rims a little and the brakes also. The rear rim almost looks like it could be from a 99 -03.

any help would be nice

Attachment swing.jpg not found

Attachment busa.jpg not found

Attachment ext.jpg not found