1978 Front brake master cylinder diameter please

More
11 Aug 2013 16:02 #600861 by Eli Peer
Hi
Can any one help me with the size/diameter in inches and millimeters of the piston of the front brake master cylinder on a 1978 Z1R please.

I want to find a replacement for the old one from a new bike that will work well with the 2 original calipers.

Thank you

Eli

Please Log in or Create an account to join the conversation.

  • Motor Head
  • Offline
  • User
  • FIX UP YOUR BIKE RIGHT AND CHEAP
More
11 Aug 2013 19:17 #600886 by Motor Head
Replied by Motor Head on topic 1978 Front brake master cylinder diameter please
Not sure about the Z1R, isn't that the master with the cable also?
But 5/8" 16mm is the common size for the more normal Kawasaki masters with dual front discs.

1982 KZ1000LTD K2 Vance & Hines 4-1 ACCEL COILS Added Vetter fairing & Bags. FOX Racing rear Shocks, Braced Swing-arm, Fork Brace, Progressive Fork Springs RT Gold Emulators, APE Valve Springs, 1166 Big Bore kit, RS34's, GPZ cams.
1980 KZ550LTD C1 Stock SOLD Miss it
1979 MAZDA RX7 in the works, 13B...
The following user(s) said Thank You: wireman

Please Log in or Create an account to join the conversation.

More
12 Aug 2013 18:52 #601060 by Eli Peer
Hi
Yes it is, most new sport bikes are with 16mm front master cylinder so I think this will work fine, I hope?

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum