- Posts: 210
- Thank you received: 10
part numbers on front forks
- Godfrey
- Topic Author
- Offline
- User
Less
More
25 Aug 2013 16:44 #603019
by Godfrey
1981 650CSR frame
1980 KZ750E engine
part numbers on front forks was created by Godfrey
Tryin to plan ahead for winter projects on the bike already, as its a hodge podge of different bike parts i was wondering if anyone knew where part or identification number are stamped on the front forks, as i recall they were from a 1000cc kaw no idea what yr. Hopein to change seals and fork oil this winter.
1981 650CSR frame
1980 KZ750E engine
Please Log in or Create an account to join the conversation.
- steell
- Offline
- User
- martin_csr
- Offline
- User
Less
More
- Posts: 8068
- Thank you received: 1656
26 Aug 2013 16:19 - 27 Aug 2013 11:24 #603177
by martin_csr
Replied by martin_csr on topic part numbers on front forks
You're probably going to have to measure the forks or the seals. Z1Enterprises.com lists fork seal dimensions.
The Ohio Cafe Racers website has a fork tube conversion chart, so you could measure the upper tubes, then see what models had the same size. Also, you could narrow them down further by noting if they are the center axle type or leading axle forks. Then use the cross-ref at Kawasaki.com or Partzilla to zero in on some seals?
The Ohio Cafe Racers website has a fork tube conversion chart, so you could measure the upper tubes, then see what models had the same size. Also, you could narrow them down further by noting if they are the center axle type or leading axle forks. Then use the cross-ref at Kawasaki.com or Partzilla to zero in on some seals?
Last edit: 27 Aug 2013 11:24 by martin_csr.
Please Log in or Create an account to join the conversation.