- Posts: 3
- Thank you received: 0
Tire Size
- shauntexas
- Topic Author
- Offline
- User
Less
More
02 Jul 2014 08:38 #638670
by shauntexas
Tire Size was created by shauntexas
Hello Yall,
I have a 77' Kz 1000 - (with mags) using the original swing arm.. could someone tell me what the largest REAR tire I can use..
Thanks
I have a 77' Kz 1000 - (with mags) using the original swing arm.. could someone tell me what the largest REAR tire I can use..
Thanks
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
02 Jul 2014 09:51 #638679
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic Tire Size
Normally one size bigger than stock is ok. But really you'll only be 10mm wider or just 5mm (3/16") per side. Not enough to give a "fat tire" look.
Later, Doug
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
The following user(s) said Thank You: PLUMMEN
Please Log in or Create an account to join the conversation.
- kzdcw
- Offline
- User
- 77' KZ1000A
Less
More
- Posts: 857
- Thank you received: 13
08 Jul 2014 07:28 #639249
by kzdcw
77' KZ1000A
Replied by kzdcw on topic Tire Size
Doug I too have a stock 77' KZ1000A that you've been helping as well as others in putting it back together again. Haven't got around to selecting the tires and sizes yet, but what would you recommend? I've used both Bridgestone Battlax Bt-45's and Avon Roadriders before on other bikes and have liked the results.
77' KZ1000A
Please Log in or Create an account to join the conversation.
- slayer61
- Offline
- User
- KZR FLAG RELAY CARRIER #62
08 Jul 2014 07:44 #639255
by slayer61
Don't be ridiculous! It's only a flesh wound!
[strike]Wife's little bike... 1984 GPZ 550 Kerker and DynaJet stage I kit[/strike]
Wife's BIG bike......[strike] 1981 GPZ 1100 Kerker and [strike]factory FI[/strike] Mikuni RS34s W/ K&N pods[/strike] SOLD
Replied by slayer61 on topic Tire Size
Don't be ridiculous! It's only a flesh wound!
[strike]Wife's little bike... 1984 GPZ 550 Kerker and DynaJet stage I kit[/strike]
Wife's BIG bike......[strike] 1981 GPZ 1100 Kerker and [strike]factory FI[/strike] Mikuni RS34s W/ K&N pods[/strike] SOLD
Please Log in or Create an account to join the conversation.
- kzdcw
- Offline
- User
- 77' KZ1000A
Less
More
- Posts: 857
- Thank you received: 13
08 Jul 2014 07:57 #639258
by kzdcw
77' KZ1000A
Replied by kzdcw on topic Tire Size
Slayer61, Do you know what is the stock rim width of these wire wheels on my KZ?
77' KZ1000A
Please Log in or Create an account to join the conversation.
- PLUMMEN
- Offline
- User
Less
More
- Posts: 8139
- Thank you received: 104
08 Jul 2014 08:43 #639263
by PLUMMEN
Still recovering,some days are better than others.
Replied by PLUMMEN on topic Tire Size
A 4.00 or a 120mm should be pretty close to tire that came stock on a wire wheel.
Anything wider than a 130 will have a really weird tread profile on that rim.
Anything wider than a 130 will have a really weird tread profile on that rim.
Still recovering,some days are better than others.
Please Log in or Create an account to join the conversation.
- slayer61
- Offline
- User
- KZR FLAG RELAY CARRIER #62
08 Jul 2014 09:11 #639266
by slayer61
Your wheel "should" have the size engraved in it somewhere. Have a look around the entire rim and it will tell you what size it is.
Don't be ridiculous! It's only a flesh wound!
[strike]Wife's little bike... 1984 GPZ 550 Kerker and DynaJet stage I kit[/strike]
Wife's BIG bike......[strike] 1981 GPZ 1100 Kerker and [strike]factory FI[/strike] Mikuni RS34s W/ K&N pods[/strike] SOLD
Replied by slayer61 on topic Tire Size
kzdcw wrote: Slayer61, Do you know what is the stock rim width of these wire wheels on my KZ?
Your wheel "should" have the size engraved in it somewhere. Have a look around the entire rim and it will tell you what size it is.
Don't be ridiculous! It's only a flesh wound!
[strike]Wife's little bike... 1984 GPZ 550 Kerker and DynaJet stage I kit[/strike]
Wife's BIG bike......[strike] 1981 GPZ 1100 Kerker and [strike]factory FI[/strike] Mikuni RS34s W/ K&N pods[/strike] SOLD
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
08 Jul 2014 09:26 - 08 Jul 2014 09:27 #639269
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic Tire Size
Something makes me think the stock front is 1.85" and the rear is 2.15".
Later, Doug
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Last edit: 08 Jul 2014 09:27 by StreetfighterKz.
Please Log in or Create an account to join the conversation.
- StreetfighterKz
- Offline
- User
Less
More
- Posts: 1510
- Thank you received: 117
08 Jul 2014 09:28 #639270
by StreetfighterKz
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
Replied by StreetfighterKz on topic Tire Size
Just checked Z1Enterprises. Those are the sizes listed for reproduction rims.
Later, Doug
Later, Doug
1978 z1000 Streetfighter
1976 z900 Stripfighter (work in progress)
1983 Gpz750 Resto-Mod
1989 Vmax
The following user(s) said Thank You: PLUMMEN
Please Log in or Create an account to join the conversation.
- Hemified
- Offline
- User
Less
More
- Posts: 39
- Thank you received: 1
08 Jul 2014 11:23 #639286
by Hemified
Replied by Hemified on topic Tire Size
On my 1976 kz900 I run perelli sport demons they are great 120/90-18 rear 100/90-19 front. Oh yeah I do run stock width spoked rims.
Please Log in or Create an account to join the conversation.