GPZ 550 Wheels on KZ 750

  • kawasaki750e
  • Topic Author
  • Offline
  • User
More
22 Jul 2014 17:43 #640996 by kawasaki750e
GPZ 550 Wheels on KZ 750 was created by kawasaki750e
Will the wheels from a GPZ 550 fit on a KZ 750?

Please Log in or Create an account to join the conversation.

  • slayer61
  • Offline
  • User
  • KZR FLAG RELAY CARRIER #62
More
23 Jul 2014 08:37 #641057 by slayer61
Replied by slayer61 on topic GPZ 550 Wheels on KZ 750
Consider looking at partzilla or Kawasaki.com and see if the axle sizes are the same on both models. What years are we talking about? If the axles are the same, you're off to a good start, then it's just a matter of finding/making spacers to align the sprocket, rotor and caliper! Easy Peasy!
Don't be ridiculous! It's only a flesh wound!

[strike]Wife's little bike... 1984 GPZ 550 Kerker and DynaJet stage I kit[/strike]
Wife's BIG bike......[strike] 1981 GPZ 1100 Kerker and [strike]factory FI[/strike] Mikuni RS34s W/ K&N pods[/strike] SOLD

Please Log in or Create an account to join the conversation.

More
23 Jul 2014 09:42 #641072 by loudhvx
Replied by loudhvx on topic GPZ 550 Wheels on KZ 750
Just FYI, there are 3 different types of GPZ550's, each with different wheels.

81 had 7-spoke.
82-83 had 5-spoke.
84-85 had a sort of 3-spoke design.
1981 KZ550 D1 gpz.
Kz550 valve train warning.
Other links.

Please Log in or Create an account to join the conversation.

More
24 Jul 2014 08:30 #641207 by Nessism
Replied by Nessism on topic GPZ 550 Wheels on KZ 750
Look at the front diameter too. The early bikes used a 19" front, but moved to 18" in later years which would be more difficult to adapt.
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

More
24 Jul 2014 11:40 #641233 by steell
Replied by steell on topic GPZ 550 Wheels on KZ 750
The easiest way to determine if there is a chance of fitting is to compare the front and rear wheel bearings, If both bikes use the same bearings then the axles are the same diameter, then all you need to worry about are spacers.
KD9JUR

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links