Heard of JBS Shocks?

  • Jbosh
  • Topic Author
  • Offline
  • User
  • 1982 Kz440 ltd D4
More
10 May 2015 09:03 #671367 by Jbosh
Heard of JBS Shocks? was created by Jbosh
Greetings,

I'm doing homework on parts prior to ordering and I am wondering if any of you guys have knowledge about these shocks.

pages.ebay.com/link/?nav=item.view&alt=web&id=151612066185

As I can't find much for reviews or evaluation, I am skeptical even though they nicely fit my budget :).

I am not interested in Chinese part bashing but instead of some honest feedback as I see a poor decision here as a matter of personal rider safety.

Cheers!

As long as I get to learn something, I'm happy!

Please Log in or Create an account to join the conversation.

  • Nessism
  • Away
  • Sustaining Member
More
10 May 2015 09:35 - 10 May 2015 09:36 #671370 by Nessism
Replied by Nessism on topic Heard of JBS Shocks?
A friend of mine does a lot of business in China. He contracts the build of various products for distribution and/or use in the states. He came back from one of his trips a while back with a couple sets of shocks like those. Springs were not installed. I took the shocks and checked the stroke smoothness and damping and there were spots in the travel where their was no damping. Apparently the sealing rings were not sealing through the full stroke. I don't know if they would break in or what, but I suspect no.

There are guys around that purchase those shocks and then tear them down and finesse the various internal parts to get them to perform properly. I suspect if the shocks had consistent damping they would be okay, but this is just a supposition on my part.
Last edit: 10 May 2015 09:36 by Nessism.
The following user(s) said Thank You: Jbosh

Please Log in or Create an account to join the conversation.

More
10 May 2015 12:39 #671392 by davido
Replied by davido on topic Heard of JBS Shocks?
I was also looking at these and did a search on't interweb for reviews. As you can imagine the consensus went from fantastic to terrible. One review stood out,saying that the aloy twixt the resevoir and the main body cracked!!
That pretty much put me off. At the end of the day,you get what you pay for and ,safety wise, you dont want to be fucking around on something like this.
Im going for YSS or IKON .Their cheapest ones arent as cool looking but they will be far better quality.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)
The following user(s) said Thank You: Jbosh

Please Log in or Create an account to join the conversation.

  • Jbosh
  • Topic Author
  • Offline
  • User
  • 1982 Kz440 ltd D4
More
10 May 2015 13:16 - 10 May 2015 13:34 #671402 by Jbosh
Replied by Jbosh on topic Heard of JBS Shocks?
davido,
You don't happen to have the link for that review by chance? I heard something similar but couldn't find the link myself.

Thanks guys! I'm thinking along the same lines but I'm still curious who this JBS company is...

As long as I get to learn something, I'm happy!
Last edit: 10 May 2015 13:34 by Jbosh. Reason: Typo

Please Log in or Create an account to join the conversation.

More
10 May 2015 14:15 #671409 by davido
Replied by davido on topic Heard of JBS Shocks?
Sorry JBosh, no link,I dont remember where I found it.I might even have made it up! Do your own search and make up your own mind. You know how the interweb is, Like I said, you get what you pay for. Im going for YSS or IKON, both have good reviews. At the top of the range are the piggy back shocks,they cost the most but they both do a basic shock at a reasonable price,Have a look at the websites.
www.yss.co.th/yss_info.php
www.ikonsuspension.com/
YSS are getting great reviews as a quality ,well priced,shock,while IKON are a rehash of the classic KONIs from the 70s/80s.
Another one is HAGON,a British company,though I dont like them as they have a pig ugly blue sticker and they rust like fuck
www.hagon-shocks.co.uk/
Another one ,worth looking at,(a bit more expensive) that are getting good reviews are Gazis
www.gazisuspension.com/products.html .

So many shocks,so little time!!
Good luck.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)
The following user(s) said Thank You: Jbosh

Please Log in or Create an account to join the conversation.

More
10 May 2015 14:47 #671414 by Kapahulu
Replied by Kapahulu on topic Heard of JBS Shocks?
That link for the shocks plus shipping works out to $180 or so. That's way too much to pay for questionable shocks. I bought a used set of Koni's for my KZ1000 on the bay recently. Less than $200 and they look great. Haven't tried them but they're Koni's - I'm not worried.

1978 KZ1000, 1976 KZ900, 1975 H2, 1973 H1, 1973 H2, 1978 RD400, 1977 RD400, 1974 RD350
2strokeworld.com

Please Log in or Create an account to join the conversation.

More
10 May 2015 15:27 - 10 May 2015 15:28 #671416 by 650ed
Replied by 650ed on topic Heard of JBS Shocks?

davido wrote: .....Another one is HAGON,a British company,though I dont like them as they have a pig ugly blue sticker and they rust like fuck....
.


What the heck are you talking about?? I seriously doubt that you have ever owned Hagon shocks because you are dead wrong about them rusting. THEY ARE MADE OF STAINLESS STEEL and they DO NOT RUST. There, I shouted it! :laugh: I don't know who told you they rust, but you shouldn't listen to any other advice they may offer you because they don't know squat about what they are talking about.

I have had the Hagon shocks on my bike for more than 12,000 miles (8 years) and they still work like new. They work every bit as well, in fact even better than, the S&W shocks I had before - and those were top of the line. Regarding the "pig ugly blue sticker" it is just that - a STICKER. So you spend 5 seconds and peel it off. Big deal?? No.

Here are my rusty, pig ugly Hagon shocks. Oh my, what a rusty, crappy mess just like the rest of my bike! Disgusting, right? Sheeesh!

Attachment 00003a-26.jpg not found


1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Attachments:
Last edit: 10 May 2015 15:28 by 650ed.

Please Log in or Create an account to join the conversation.

  • Nessism
  • Away
  • Sustaining Member
More
10 May 2015 18:10 #671436 by Nessism
Replied by Nessism on topic Heard of JBS Shocks?
The stainless Hagons are an upcharge. You better pay the upcharge for the chrome plated springs too because I've also heard about Hagons rusting. The damping is heavy too, unless you get a custom set that's valved better.

Please Log in or Create an account to join the conversation.

More
10 May 2015 18:23 - 10 May 2015 18:29 #671439 by 650ed
Replied by 650ed on topic Heard of JBS Shocks?
You don't actually need a "custom" set to get the level of valving that best suits you. Assuming you buy the Hagon shocks new from a reputable dealer you get to pick the valving or have an expert help you pick one. They come in everything from soft to xxtra heavy. Notice in the Dave Quinn site below (half way down the page) the wide variety of valving and spring weights offered. He will set the shocks up for the customer after getting input on the bike, driving style, accessories, etc. That's where I bought mine and he set them up perfectly for me - no extra charge. Ed

davequinnmotorcycles.com/cgi-bin/webc.cg...GON_TWIN_SHOCKS.html

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
Last edit: 10 May 2015 18:29 by 650ed.

Please Log in or Create an account to join the conversation.

More
10 May 2015 18:49 #671443 by floivanus
Replied by floivanus on topic Heard of JBS Shocks?
Those JBS shocks look like any other chinese piggyback shock, i've bought a few RFY or RKY shock pairs for me bikes for $80 shipped well worth the $80 an better than the originals

my bikes; 80kz1000(project), 77 gl1000, 74 h2 (project)
Past; 78 kz1000, 83 kz550
Andrew

Please Log in or Create an account to join the conversation.

  • Nessism
  • Away
  • Sustaining Member
More
10 May 2015 21:43 - 11 May 2015 05:14 #671471 by Nessism
Replied by Nessism on topic Heard of JBS Shocks?

650ed wrote: You don't actually need a "custom" set to get the level of valving that best suits you. Assuming you buy the Hagon shocks new from a reputable dealer you get to pick the valving or have an expert help you pick one. They come in everything from soft to xxtra heavy. Notice in the Dave Quinn site below (half way down the page) the wide variety of valving and spring weights offered. He will set the shocks up for the customer after getting input on the bike, driving style, accessories, etc. That's where I bought mine and he set them up perfectly for me - no extra charge. Ed

davequinnmotorcycles.com/cgi-bin/webc.cg...GON_TWIN_SHOCKS.html


A friend bought a pair of Hagons from Dave and they were set up like a buckboard. He tried to contact him and send them back but Dave dodged his calls. I think Hagons are okay if you know what you need, but I'm not so sure about blindly allowing someone to set them up.
Last edit: 11 May 2015 05:14 by Nessism.

Please Log in or Create an account to join the conversation.

More
10 May 2015 23:59 #671477 by davido
Replied by davido on topic Heard of JBS Shocks?
Id go for HAGONs myself,Theyre fantastic and they never rust. Also they come with a blue sticker that you can remove in seconds.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum