Tire stuff Shinko

  • missionkz
  • Topic Author
  • Offline
  • Sustaining Member
More
27 Jul 2015 10:30 #682986 by missionkz
Replied by missionkz on topic Tire stuff Shinko
Steve. Any problem with the 130 pushing into the chain guard?

Bruce
1977 KZ1000A1
2016 Triumph T120 Bonneville
Far North East Metro Denver Colorado

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
27 Jul 2015 10:33 #682987 by SWest
Replied by SWest on topic Tire stuff Shinko
No I ditched that long ago. I made my own.
Steve

Please Log in or Create an account to join the conversation.

More
27 Jul 2015 11:31 #682996 by OLKZ
Replied by OLKZ on topic Tire stuff Shinko
An online dealer would be the only option, since I couldn't find such a tire locally. Whom do you suggest? Any problems with motorcycle superstore.com? Does Z1 sell tires? I should check.

1978 KZ650B2 - Blue - runs!
New Dyna-S ignition & coils 6-2014

Please Log in or Create an account to join the conversation.

More
27 Jul 2015 12:17 #683003 by jackleberry
Replied by jackleberry on topic Tire stuff Shinko

OLKZ wrote: An online dealer would be the only option, since I couldn't find such a tire locally. Whom do you suggest? Any problems with motorcycle superstore.com? Does Z1 sell tires? I should check.


I buy them from motorcycle superstore. They usually ship faster than anyone else and have the best price. Buy a pair and you get free shipping, but the shipping is only like $6.99 for one tire, which is less than Z1E will charge you to ship a single o-ring.

1997 KZ1000P (P16)
2001 KZ1000P (P20)

Please Log in or Create an account to join the conversation.

  • missionkz
  • Topic Author
  • Offline
  • Sustaining Member
More
27 Jul 2015 12:25 #683005 by missionkz
Replied by missionkz on topic Tire stuff Shinko

OLKZ wrote: An online dealer would be the only option, since I couldn't find such a tire locally. Whom do you suggest? Any problems with motorcycle superstore.com? Does Z1 sell tires? I should check.

That is where I bought mine earlier this spring.
Shipping is free for two tires from Motorcycle Superstore.

www.motorcycle-superstore.com/search/go#w=shinko%20712

120/90H-18 is $56.00
100/90H-19 is $49.00
if it will fi the fender and bracket bolts (etc)...
the 110/90H-19 is $54.00
Pretty solid deal for a pair of tires.

Bruce
1977 KZ1000A1
2016 Triumph T120 Bonneville
Far North East Metro Denver Colorado

Please Log in or Create an account to join the conversation.

More
27 Jul 2015 15:19 #683034 by 650ed
Replied by 650ed on topic Tire stuff Shinko
Also check out denniskirk.com Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
28 Jul 2015 06:51 - 28 Jul 2015 06:51 #683101 by SWest
Replied by SWest on topic Tire stuff Shinko
I think I'll go back to the 120/90-18. I just noticed my tire track is very narrow on my dirt driveway. That being the case the tire is wearing in the middle too fast.
Steve
Last edit: 28 Jul 2015 06:51 by SWest.

Please Log in or Create an account to join the conversation.

More
28 Jul 2015 07:06 #683103 by Nessism
Replied by Nessism on topic Tire stuff Shinko
Not sure how wide the wheel is on some of you guys's bikes but a 120 is a bit big on a 2.15 wheel but doable. I wouldn't run a 130 on a 2.15.

I've run the 230 Shinko before and thought it was a decent tire. It took more balance weight than some other tires I've used but it wasn't too bad. Longevity is nothing to write home about, but from what I've read the handling is good right to the end.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
28 Jul 2015 07:29 #683108 by SWest
Replied by SWest on topic Tire stuff Shinko
I bought these tires because they have a harder rubber compound down the middle. My IRC went away quick. Not much to chose from on our vintage bikes.
Steve

Please Log in or Create an account to join the conversation.

More
28 Jul 2015 08:18 #683117 by 650ed
Replied by 650ed on topic Tire stuff Shinko
I've been running 120/90-18 tires on the rear of my KZ650-C1 for 11 years. Before that, I ran 130/90-18 tires for many years. Both fit, and both work, BUT I found that because the 130 tire is squeezed so tight on the 2.15 rim the cross section of the tire is distorted somewhat. As a result, it doesn't put any more tread on the pavement than a 120 tire. The 120 is the perfect fit for the 2.15 rear rim - no problems at all.

There actually is an excellent selection of tires in the 120/90-18 and 100/90-19 sizes for our bikes. I use Pirelli Sport Demons and really like them. I have used Michelin Macadams too, but they were a disappointment. In addition to Pirelli and Michelin tires in our sizes are available from Bridgestone, Continental, Metzeler, Dunlop, etc., so finding a decent tire for a KZ should not be at all difficult. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
28 Jul 2015 08:21 #683118 by kaw-a-holic
Replied by kaw-a-holic on topic Tire stuff Shinko

swest wrote: I think I'll go back to the 120/90-18. I just noticed my tire track is very narrow on my dirt driveway. That being the case the tire is wearing in the middle too fast.
Steve

That's what I did not like about the Shinkos, they would were fast in the middle. I ride with a pretty heavy throttle hand which does not help much. I would try to push it into the corners to wear them evenly but I just didn't like the frame flex I would get out of it. Of course that is now not an issue since I am now running 120/60/17 front and 160/60/17 rear Pilot 3's. Can't wait to test them out.

Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
28 Jul 2015 10:43 #683134 by SWest
Replied by SWest on topic Tire stuff Shinko
I've been cutting pieces for my frame so when I have the head off, I can weld them in. I'm tired of the "frame flex" too.
Steve

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum