530 chain conversion

More
12 Nov 2015 11:06 #698362 by JaFlo
530 chain conversion was created by JaFlo
I'm about to order 530 sprockets and a chain for my 82 kz750ltd. If my math is correct, a 16 front sprocket and a 38 rear sprocket should put me close to stock gearing (based on stock 13/32 630 sprockets). The stock 630 chain is 84 links, so that puts me at 102 links for a 530, correct?

Please Log in or Create an account to join the conversation.

  • Nessism
  • Away
  • Sustaining Member
More
12 Nov 2015 11:41 #698364 by Nessism
Replied by Nessism on topic 530 chain conversion

JaFlo wrote: I'm about to order 530 sprockets and a chain for my 82 kz750ltd. If my math is correct, a 16 front sprocket and a 38 rear sprocket should put me close to stock gearing (based on stock 13/32 630 sprockets). The stock 630 chain is 84 links, so that puts me at 102 links for a 530, correct?


Sounds right.
Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

More
12 Nov 2015 12:42 #698368 by JaFlo
Replied by JaFlo on topic 530 chain conversion
If I plan on going to an 18" rear wheel, should I go with a 40 tooth rear sprocket?

Please Log in or Create an account to join the conversation.

More
12 Nov 2015 14:04 #698374 by zukdave
Replied by zukdave on topic 530 chain conversion
On the street I run 16-42 with 530 chain.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links