76 kz750 rims

More
25 Feb 2016 09:14 #712451 by pete greek1
Replied by pete greek1 on topic 76 kz750 rims
In the past I.ve used Diet Coke (because it's less sticky) & a crumpled up piece of aluminum foil To remove rust from chrome
www.google.com/url?sa=t&rct=j&q=&esrc=s&...GHOPDpi0U26XwByS7Otw
Pete

1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!

Please Log in or Create an account to join the conversation.

More
25 Feb 2016 10:50 #712474 by Sardonicus
Replied by Sardonicus on topic 76 kz750 rims
That's pretty cool. I will have to try that on something when I get home.

1976 KZ750 B1

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
25 Feb 2016 14:49 #712495 by DoctoRot
Replied by DoctoRot on topic 76 kz750 rims
The coke and tinfoil does work pretty well, but it will rust again pretty quickly unless you seal it. I use Never Dull after doing the tin foil trick. its a wax and seals it pretty good. if you keep after it every 6 months or so it will look good for a long time.

Please Log in or Create an account to join the conversation.

More
25 Feb 2016 15:14 #712496 by 650ed
Replied by 650ed on topic 76 kz750 rims
I had one tire that was nearly impossible to remove, so I did the following. I used a box knife to cut both of the sidewalls all the way around parallel to and close to the rim. This enabled me to easily discard the tread and most of the sidewalls, and it left just a narrow part of each sidewall still on the rim. These narrow sidewalls then were very easy to remove and the task was done. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
25 Feb 2016 16:01 #712503 by SWest
Replied by SWest on topic 76 kz750 rims
SHT, I've been doing it wrong. :blush: :lol:
Steve

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
25 Feb 2016 19:22 #712536 by DoctoRot
Replied by DoctoRot on topic 76 kz750 rims

650ed wrote: I had one tire that was nearly impossible to remove, so I did the following. I used a box knife to cut both of the sidewalls all the way around parallel to and close to the rim. This enabled me to easily discard the tread and most of the sidewalls, and it left just a narrow part of each sidewall still on the rim. These narrow sidewalls then were very easy to remove and the task was done. Ed


Thats a better way of doing it. next time i have a tire thats impersonating a rock I will try this.

Please Log in or Create an account to join the conversation.

More
26 Feb 2016 02:52 #712551 by Sardonicus
Replied by Sardonicus on topic 76 kz750 rims
it will be a bit before I'm ready to buy new tires but thanks for all the good info - when the time comes to dive into that it'll be much easier now.

1976 KZ750 B1

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum