Tires for 1980 kz1000g

More
04 Jun 2016 18:44 #730076 by MadShad
Tires for 1980 kz1000g was created by MadShad
1980 kz1000 G.
Time to replace the ancient goodyears
Mt90-16 rear
Ml90-19 front.
I've not bought motorcycle tires since 1995 so please check my math.
Here's what I'm looking at in the attachment.

Shelbyville, Indiana. '80 KZ1000
No more of that talk or I'll put the leeches on you, understand?
Attachments:

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
04 Jun 2016 18:52 - 04 Jun 2016 18:53 #730078 by SWest
Last edit: 04 Jun 2016 18:53 by SWest.

Please Log in or Create an account to join the conversation.

More
04 Jun 2016 20:22 #730112 by MadShad
Replied by MadShad on topic Tires for 1980 kz1000g
I'm asking more about the sizes, want to make sure I order what will fit.

Shelbyville, Indiana. '80 KZ1000
No more of that talk or I'll put the leeches on you, understand?

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
04 Jun 2016 20:29 #730114 by SWest

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 05:50 #730139 by 650ed
Replied by 650ed on topic Tires for 1980 kz1000g
No - 120 rear is too narrow. 130 rear is correct. The sizes you show in the image with the Pirelli Sport Demons should be correct according to the conversion charts - please see info below. The only recommendation I would make is that you consider using Metzeler tubes if you can get them in the correct sizes for your tires. When I installed Pirelli Sport Demon tires I contacted Pirelli and asked what tubes I should use since Pirelli did not offer tubes in my sizes. Pirelli recommended Metzeler tubes. Granted, Metzeler is a Pirelli sister company, but I bought their tubes and they are very high quality. Ed

The first link below shows tire size conversions.

The second link below is the diagram for the 1980 KZ1000-G1 which shows the original front tire size (part marked #19). Its size is listed as "350-19GT RWL | ML90-90 " Notice on the first link that width equates to a 100/90.

The third link below is the diagram for the 1980 KZ1000-G1 which shows the original rear tire size (part marked #24). Its size is listed as "510-16AT RWL | MT90-16T" Notice in the first link that equates to a 130/90-16. Ed

www.mad-ducati.com/Technical/TireInfo/TireChart.html

www.powersportswarehouse.com/p/Kawasaki#...0-G1-1980/070083D-14

www.powersportswarehouse.com/p/Kawasaki#...00-G1-1980/070083E-3

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)
The following user(s) said Thank You: MadShad

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 05:51 #730141 by pete greek1
Replied by pete greek1 on topic Tires for 1980 kz1000g
I'm running 100.90-19. & 130.90-16, Sport Demons on my 76 & 80 LTD's
Pete

1980 LTD 1000..,1976 LTD 900, have the 1000&900 now. the rest are previous= 1978 KZ 650 B.., 1980 Yamaha XT 500..,1978 Yamaha DT 400.., 1977 Yamaha yz 80..,Honda trail ct 70.., Honda QA 50...5-1/2 hp brigs & straton CAT chopper mini bike...3-1/2 hp mini bike (WHEN GAS WAS ABOUT 45 CENTS A GALLON)!!!!

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 05:59 - 05 Jun 2016 06:02 #730143 by MadShad
Replied by MadShad on topic Tires for 1980 kz1000g
It still has the oem goodyear eagles on it, "gt" in the back "at" in the front.
measuring the rear tire it's about 5.25 inches wide but pretty low profile.

What are the markings on the tire?
Steve

Shelbyville, Indiana. '80 KZ1000
No more of that talk or I'll put the leeches on you, understand?
Last edit: 05 Jun 2016 06:02 by SWest.

Please Log in or Create an account to join the conversation.

More
05 Jun 2016 07:23 - 05 Jun 2016 07:24 #730153 by MadShad
Replied by MadShad on topic Tires for 1980 kz1000g
Mt90-16 rear
ML90-19 front

Shelbyville, Indiana. '80 KZ1000
No more of that talk or I'll put the leeches on you, understand?
Last edit: 05 Jun 2016 07:24 by MadShad.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum