I'm trying to put clip on bars on it but it has two holes on the forks, can I seal them? With like a screw do I drill through the clip on bars and attach the hose
Are they the air-balance ports? You can usually get away with blocking them, if you don't need extra air in the forks. But you may have to get stiffer springs to compensate for the lack of ability to add air. I prefer using stiffer springs with no extra air pressure.
There should have been some fixture there to deal with the holes. Sometimes I see sealing rings that connect the two forks with a hose. Sometimes the air filler will be connected to the hose as well. Some air forks have one filler at the top of each fork leg.
No eBay APP ID and/or Cert ID defined in Kunena configurationThey are the air balancer holes. You can either cover them or buy the link tubes from ripBay
