spacer on the axle for the bearings...

Ok guys I bought the bike some time ago, the owner befor me took the rear wheel apart and I am missing the bearings, circlips, seals, chain tensioners, and the spacers or collars that go on the axles to space out the bearings. Can I substitue a section of pipe or any thing of the nature for these collars. Also do you guys know of a site where I can get parts to get the rear back together with out putting the piggy bank in shock? Thanks guys!!

id stay away from pipe,theres plenty of parts floating around this site.we just need a picture to compare differant parts to.

LOL Well I do not know how much this will help but it is number 12,14,20 on the parts diagram. they are listed as COLLAR,REAR HUB BRG. the part number on 20 is 92027-1047. I am just not sure of how to put a picture of the parts diagram in this and I don't have the old ones to take pictures of. but I guess I could take a screen shot of it if you would like me to. Thanks for the fast replys bud!!

You do it like this

if they are the same as an 82 csr 750 then i have all the parts you need yours for shipping cost. except for the bearings i would only reccomend new there.

steell wrote:

You do it like this

show off!:S

Bearings can be had from generic bearing wholesalers. Spacer can be fabbed from good quality steel parts if you have access to a machine shop or buddy who works at machine shop. Try looking under bike wreckers for aprts. Will run as much as 50% of new OEM.

btchalice wrote:

if they are the same as an 82 csr 750 then i have all the parts you need yours for shipping cost. except for the bearings i would only reccomend new there.

Does any one know if they will work? I have family who are tool and die makers but to have them fab it I would need specific measurements. Thanks for the replys!!