Where Do I source this KZ750L3 Bracket?

More
19 Feb 2017 08:40 #754564 by chopper1963
Replied by chopper1963 on topic Where Do I source this KZ750L3 Bracket?
No joy at all in searching all the usual places. If anyone runs across one please share ...

Did they make this bike in Canada?

Please Log in or Create an account to join the conversation.

More
19 Feb 2017 09:02 - 19 Feb 2017 09:03 #754566 by martin_csr
Replied by martin_csr on topic Where Do I source this KZ750L3 Bracket?
Kawasaki offered the 750-L1 thru L4 in other parts of the world. outside of N America they were probably marketed as Z750 instead of KZ750. ??? There was also the GT750 that had a similar tank, but I don't know how they were attached. I would check eebbaayy UK.

Does the bracket need to be that complicated? Some tanks are held in place by one bolt. others by just a rubber band.
Maybe you could mock up something out of thin sheet metal or thin aluminum, then see if you could get one made.
Last edit: 19 Feb 2017 09:03 by martin_csr.

Please Log in or Create an account to join the conversation.

  • Tyrell Corp
  • Offline
  • User
  • "You were made as well as we could make you"
More
19 Feb 2017 13:27 #754582 by Tyrell Corp
Replied by Tyrell Corp on topic Where Do I source this KZ750L3 Bracket?
It is quite a clever ribbed metal pressing , thin and lightweight but strong enough to hold the tank on...much easier salvaged than fabricated.

OP if you find one I can forward it to you from uk.

1980 Gpz550 D1, 1981 GPz550 D1. 1982 GPz750R1. 1983 z1000R R2. all four aces

Please Log in or Create an account to join the conversation.

More
20 Feb 2017 05:00 - 20 Feb 2017 05:14 #754626 by martin_csr
Replied by martin_csr on topic Where Do I source this KZ750L3 Bracket?
He's been looking for a while, so easier found than fabbed is debatable. hee.
Last edit: 20 Feb 2017 05:14 by martin_csr.

Please Log in or Create an account to join the conversation.

More
20 Feb 2017 05:44 #754628 by 650ed
Replied by 650ed on topic Where Do I source this KZ750L3 Bracket?
There appears to be a NOS one available at the Partssweden parts place in Sweden (see www.partssweden.se/1992-p7-z750/fuel-tank ). I bought parts from their predecessor before and was very pleased with my purchases and the price. You should ask them if the price shown (169) is stated in Swedish Krona or US Dollars. 169 Swedish Krona = about 19 US Dollars, so if it is in Swedish Krona it 's a good buy. Ed

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
20 Feb 2017 05:50 #754629 by Mcdroid
Replied by Mcdroid on topic Where Do I source this KZ750L3 Bracket?

650ed wrote: There appears to be a NOS one available at the Partssweden parts place in Sweden (see www.partssweden.se/1992-p7-z750/fuel-tank ). I bought parts from their predecessor before and was very pleased with my purchases and the price. You should ask them if the price shown (169) is stated in Swedish Krona or US Dollars. 169 Swedish Krona = about 19 US Dollars, so if it is in Swedish Krona it 's a good buy. Ed


It appears to be listed in Krona...buy this immediately as you might not see another NOS for quite some time. :)

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum