1976 KZ400 D3 Front Brake Caliper Issues

More
03 Dec 2017 09:33 #775473 by Jack_Mills
Replied by Jack_Mills on topic 1976 KZ400 D3 Front Brake Caliper Issues
Ill take some measurements tomorrow late day and post em here.

74 kz400 D1
75 kz400 D2
75 kz400 D2
75 kz400 D2
76 kz400 D3
76 kz400 D3
77 kz400 A1
78 kz400 B1
80 xl80s
81 kz440 B2
81 GL1100
81 xl80s
81 xr80
96 K1100LT
18 HAWK250
Thanks goes out to all folks who share their great knowledge teaching others about classic metric motorcycles.
The following user(s) said Thank You: ThatGPzGuy

Please Log in or Create an account to join the conversation.

More
03 Dec 2017 11:39 - 03 Dec 2017 11:44 #775479 by martin_csr
Replied by martin_csr on topic 1976 KZ400 D3 Front Brake Caliper Issues
By alinaaseh: I made matters worse ...., and rounded the bolt in the process. No amount of WD40 & plying has made it budge.

If you're using regular wd40, that stuff really isn't a penetrating oil. it's just a light lubricant. They do now make a penetrant, claiming it's better than pb blaster. pbb didn't do as good as Liquid Wrench in a test floating around the internet.

For stuck bolts I use Liquid wrench penetrating spray lubricant. It's readily available & cheap. and it works.
Spray. tap tap tap the part with a hammer & wood block. repeat. let sit overnight. or several nights. spray. repeat.
Kroil is supposed to be best, but it's more expensive & I've never seen it in any auto parts store or hardware store.

Keep in mind that a penetrant may attack the rubber & plastic parts and will contaminate the brake fluid.
So you should remove the rubber/plastic parts before spraying, then disassemble & thoroughly clean everything afterwards.
If your bike has old old old rubber original brake lines, you should replace them.
....
Last edit: 03 Dec 2017 11:44 by martin_csr.

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
03 Dec 2017 14:15 #775489 by DoctoRot
Replied by DoctoRot on topic 1976 KZ400 D3 Front Brake Caliper Issues
I really like a 50/50 mix of acetone and ATF for penetrating oil. Works better than anything else i've used and is super cheap to make.

Please Log in or Create an account to join the conversation.

More
04 Dec 2017 16:31 #775570 by Jack_Mills
Replied by Jack_Mills on topic 1976 KZ400 D3 Front Brake Caliper Issues
Hey,

I was unable to take a measurement because the caliper is all back together w fluid in and working, and didnt want to chance anything. I do have the 77 caliper there, I will take some measurements of that hopefully tomorrow. Sorry!

74 kz400 D1
75 kz400 D2
75 kz400 D2
75 kz400 D2
76 kz400 D3
76 kz400 D3
77 kz400 A1
78 kz400 B1
80 xl80s
81 kz440 B2
81 GL1100
81 xl80s
81 xr80
96 K1100LT
18 HAWK250
Thanks goes out to all folks who share their great knowledge teaching others about classic metric motorcycles.
The following user(s) said Thank You: ThatGPzGuy

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
04 Dec 2017 16:54 #775576 by ThatGPzGuy
Replied by ThatGPzGuy on topic 1976 KZ400 D3 Front Brake Caliper Issues
No eBay APP ID and/or Cert ID defined in Kunena configurationNo worries.
Mine is back together with the eBay oil seal. So far so good. No leaks and it seems to be working. I also switched over to DOT5 so I am working thru that as well. In any case, it's good to have the KZ400 back.
Here is the link for any other KZ400 people looking for the caliper seal:

Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

More
04 Dec 2017 17:00 #775577 by Jack_Mills
Replied by Jack_Mills on topic 1976 KZ400 D3 Front Brake Caliper Issues
Great news!

74 kz400 D1
75 kz400 D2
75 kz400 D2
75 kz400 D2
76 kz400 D3
76 kz400 D3
77 kz400 A1
78 kz400 B1
80 xl80s
81 kz440 B2
81 GL1100
81 xl80s
81 xr80
96 K1100LT
18 HAWK250
Thanks goes out to all folks who share their great knowledge teaching others about classic metric motorcycles.

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
13 Nov 2020 11:19 #838436 by ThatGPzGuy
Replied by ThatGPzGuy on topic 1976 KZ400 D3 Front Brake Caliper Issues
Update: The seal I purchased from the ebay link above has failed. The bike only has about 20 miles on it but the seal will no longer seal causing the brakes to seep fluid from the caliper.
Back to square one.

Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

More
13 Nov 2020 14:23 #838447 by TexasKZ
Replied by TexasKZ on topic 1976 KZ400 D3 Front Brake Caliper Issues
That bites.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

  • ThatGPzGuy
  • Offline
  • Sustaining Member
  • More Sparky than Speed Racer
More
13 Nov 2020 14:34 #838448 by ThatGPzGuy
Replied by ThatGPzGuy on topic 1976 KZ400 D3 Front Brake Caliper Issues
To his credit the ebay seller has offered to send me another one and to help any way he can.

Jim
North GA
2016 Yamaha FJR1300ES
1982 GPz750 R1
1974 Kawasaki H1
1976 Kawasaki KZ400
1979 Yamaha XS650 cafe'
2001 KZ1000P
2001 Yamaha YZ426
1981 Honda XR200 stroked in an '89 CR125 chassis
1965 Mustang
1967 Triumph GT6
1976 Bronco
"If you didn't build it, it's not really yours"

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum