- Posts: 53
- Thank you received: 0
Brakes Dragging
- Kevin STP
- Topic Author
- Offline
- User
Less
More
29 May 2018 05:51 #784290
by Kevin STP
83 Spectre 750
Brakes Dragging was created by Kevin STP
Hey All, I have an 83 Spectre 750 and when it has been sitting, even overnight, the brakes drag . After riding for a few minutes they release. I have had to park it the past couple of yrs. due to health issues and am riding again. This has been something I can't figure out. I have changed Brake pads,cleaned caliper slideing parts and flushed the fluid. I need some help.
83 Spectre 750
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7596
- Thank you received: 2248
29 May 2018 06:29 #784295
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic Brakes Dragging
How long has it been since the calipers have been disassembled, cleaned, and reassembled with new seals?
Crud can build up around the pistons, causing them to stick. Petrified seals can do the same.
Crud can build up around the pistons, causing them to stick. Petrified seals can do the same.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
The following user(s) said Thank You: Nessism
Please Log in or Create an account to join the conversation.
- Kevin STP
- Topic Author
- Offline
- User
Less
More
- Posts: 53
- Thank you received: 0
29 May 2018 06:41 #784297
by Kevin STP
83 Spectre 750
Replied by Kevin STP on topic Brakes Dragging
It’s been a couple yrs. of no riding but back then I disassembled and cleaned all brake calipers and Master cyl. Seals seemed flexible and pistons were clean- not scored or pitted. I put in fresh fluid and bled the system. May be best to rebuild everything? Maybe upgrade to better brake system ?
83 Spectre 750
Please Log in or Create an account to join the conversation.
- TexasKZ
- Offline
- Platinum Member
Less
More
- Posts: 7596
- Thank you received: 2248
29 May 2018 06:46 #784298
by TexasKZ
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
Replied by TexasKZ on topic Brakes Dragging
No need for extreme measures. It could also be that the tiny relief port in the master has gotten clogged.
Also, if the flexible lines are really old, one may have collapsed internally or may have serious barnacle build up,
Also, if the flexible lines are really old, one may have collapsed internally or may have serious barnacle build up,
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough
The following user(s) said Thank You: Kevin STP
Please Log in or Create an account to join the conversation.
- Kevin STP
- Topic Author
- Offline
- User
Less
More
- Posts: 53
- Thank you received: 0
29 May 2018 08:19 #784306
by Kevin STP
83 Spectre 750
Replied by Kevin STP on topic Brakes Dragging
Thanks, I will check it out later today.
83 Spectre 750
Please Log in or Create an account to join the conversation.
- Nessism
- Offline
- Sustaining Member
Less
More
- Posts: 7554
- Thank you received: 2870
29 May 2018 11:37 #784312
by Nessism
Replied by Nessism on topic Brakes Dragging
The old rubber lines fill up with scale inside which is one reason they should be changed if still running the originals.
The following user(s) said Thank You: Kevin STP
Please Log in or Create an account to join the conversation.
- Kevin STP
- Topic Author
- Offline
- User
Less
More
- Posts: 53
- Thank you received: 0
29 May 2018 12:00 #784313
by Kevin STP
83 Spectre 750
Replied by Kevin STP on topic Brakes Dragging
I will look for new lines and a Master Cyl. rebuild. Time to get back on the road !!!
83 Spectre 750
Please Log in or Create an account to join the conversation.