Z1 Euro Dual Disc Thickness

More
05 Dec 2019 06:48 #814940 by asphalt900
Z1 Euro Dual Disc Thickness was created by asphalt900
Just wondering? Did the Z1 dual disc set-up offered as original supplied equipment across the pond get the same thickness of each 6-bolt disc as the USA versions single disc?

Please Log in or Create an account to join the conversation.

More
06 Dec 2019 05:50 - 06 Dec 2019 05:59 #814975 by Warren3200gt
Replied by Warren3200gt on topic Z1 Euro Dual Disc Thickness
I have asked on Z1OC forum for you. Reply was "there is no such thing as a 6 hole thin disc". Early Z1's until the A4 had 6 hole discs. A4 onwards had 4 Hole discs.
6 hole discs were only made in 7mm thickness and 4 hole in both 7mm and 5mm thickness.


Z1000J2 somewhat modified!

Last edit: 06 Dec 2019 05:59 by Warren3200gt.
The following user(s) said Thank You: asphalt900

Please Log in or Create an account to join the conversation.

More
06 Dec 2019 07:11 #814978 by asphalt900
Replied by asphalt900 on topic Z1 Euro Dual Disc Thickness
Thank-You for the reply Warren! Too bad the USA got robbed of this feature and had to pay extra. I knew the 9999xxx Accessory RH disc upgrade got the thick(7mm) just wondering about other markets.

Please Log in or Create an account to join the conversation.

More
06 Dec 2019 12:01 #814993 by Rick H.
Replied by Rick H. on topic Z1 Euro Dual Disc Thickness

asphalt900 wrote: Thank-You for the reply Warren! Too bad the USA got robbed of this feature and had to pay extra. I knew the 9999xxx Accessory RH disc upgrade got the thick(7mm) just wondering about other markets.


Wouldn't that make sense seeing as though the single rotor bikes were equipped with 7mm rotors?

Rick H.

Rick H.

1977 Kawasaki KZ-1000A1

Please Log in or Create an account to join the conversation.

More
07 Dec 2019 06:16 #815026 by asphalt900
Replied by asphalt900 on topic Z1 Euro Dual Disc Thickness
Absolutely true for the USA Rick, would be silly to have two different disc's. But subtle differences in European Kawi's, lighting, fenders, seats etc. you never know?

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
07 Dec 2019 07:07 - 07 Dec 2019 07:20 #815032 by SWest
Replied by SWest on topic Z1 Euro Dual Disc Thickness
I switched to duel disks in 87. I was wrenching at a salvage yard restoring bikes that were worth it. Some were too far gone. :( Combined the parts from H2's,GPZ 750 and two KZ 900's to do it. I already had a front wheel from a KZ 900 parts bike I had on hand. The disks were heavy but didn't cause any problems. Later I put in progressive springs and the whole setup worked great. In 15 I picked up two factory drilled disks from a later model Z 1000. One caliper is upside down but there's no issue bleeding it at the banjo. The one bracket has a cutout on the bottom and a washer cured that. I like the H2 calipers even though they're heavier than stock, I think they're sexy. :evil: Been planning on drilling and tapping the one and installing a bleeder but that's not a high priority.
I'm just RIDING THE PISS OUT OF IT. :woohoo:
Steve
Last edit: 07 Dec 2019 07:20 by SWest.

Please Log in or Create an account to join the conversation.

More
07 Dec 2019 07:37 #815037 by asphalt900
Replied by asphalt900 on topic Z1 Euro Dual Disc Thickness
Steve that's a Johnny Cash song frontend, you know the one, 56-57-58..... Your weather out there is probably perfect this time of year so ride the ---- out of it!!
The following user(s) said Thank You: SWest

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
07 Dec 2019 07:41 #815038 by SWest
Replied by SWest on topic Z1 Euro Dual Disc Thickness
80% good riding weather. Some rain but I can dig it. B)
Steve

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum