- Posts: 23063
- Thank you received: 2768
Z1KZP swing arm swap
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
12 Oct 2020 16:34 #836729
by SWest
Replied by SWest on topic Z1KZP swing arm swap
looks like it's good for now. 
Steve
Steve
Please Log in or Create an account to join the conversation.
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
16 Oct 2020 12:33 #837011
by SWest
Replied by SWest on topic Z1KZP swing arm swap
Took it out, hit the whoopty doos at 80. it didn't bottom out so it should be good to go.
Steve
Steve
Please Log in or Create an account to join the conversation.
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
- mopguy
-
- Offline
- Sustaining Member
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
10 Nov 2020 17:49 #838322
by SWest
Replied by SWest on topic Z1KZP swing arm swap
Thanks buddy. Will do.
Steve
Steve
Please Log in or Create an account to join the conversation.
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
19 Dec 2020 20:54 #840353
by SWest
Replied by SWest on topic Z1KZP swing arm swap
Glad I checked it.
Steve
Steve
Please Log in or Create an account to join the conversation.
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014
03 Jan 2021 08:49 #841110
by SWest
Replied by SWest on topic Z1KZP swing arm swap
GoPro 3 sucks. I was talking about buying a sidewinder baffle so it would come straight out not up like the one I have. Got the tail end on my comments. The cam skips over a few clips so the video is choppy and hard to collate. Going to buy a different one. 
I put washers behind the sprocket to move it over to align it with the countershaft sprocket. Looks good to me. Will report back tomorrow.
Steve
I put washers behind the sprocket to move it over to align it with the countershaft sprocket. Looks good to me. Will report back tomorrow.
Steve
Please Log in or Create an account to join the conversation.
- Mikaw
-
- Offline
- Sustaining Member
03 Jan 2021 09:27 #841113
by Mikaw
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Replied by Mikaw on topic Z1KZP swing arm swap
Steve KHI made a spacer between the crush drive and the sprocket when using an O-Ring chain. Might be more solid then a stack of washers.
1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.
Please Log in or Create an account to join the conversation.
- SWest
-
Topic Author
- Offline
- Sustaining Member
- 10 22 2014