- Posts: 70
- Thank you received: 2
Foot Peg Studs???
- Olbeedo
- Topic Author
- Offline
- User
Less
More
07 Jul 2022 12:41 #870014
by Olbeedo
OlBeedo- KZ for Life........................
Foot Peg Studs??? was created by Olbeedo
I got some new drag pegs from Pingel and they mount with their own bolts but I need o get the old studs out, any suggestions? Can I heat them or pound them out? or is there a trick to this?
OlBeedo- KZ for Life........................
Please Log in or Create an account to join the conversation.
- Wheelhop
- Offline
- Sustaining Member
Less
More
- Posts: 614
- Thank you received: 319
07 Jul 2022 13:18 #870015
by Wheelhop
1978 KZ 1000B (73 tribute)
1977 KZ1000 project
1976 KZ 900
1976 KV 75
1976 Honda Elsinore MT250
1974 Z1 900 project
1971 Honda CT70
Replied by Wheelhop on topic Foot Peg Studs???
You could try putting two nuts tightened against each other on the end of threads and then try to wrench them out.
I tried a pipe wrench also and it worked but it damaged the peg.
I tried a pipe wrench also and it worked but it damaged the peg.
1978 KZ 1000B (73 tribute)
1977 KZ1000 project
1976 KZ 900
1976 KV 75
1976 Honda Elsinore MT250
1974 Z1 900 project
1971 Honda CT70
Please Log in or Create an account to join the conversation.
- hardrockminer
- Offline
- Sustaining Member
Less
More
- Posts: 3044
- Thank you received: 1094
07 Jul 2022 14:16 #870019
by hardrockminer
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.
Replied by hardrockminer on topic Foot Peg Studs???
There should be a nut on the inside end. If not, they should just screw out.
I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.
Please Log in or Create an account to join the conversation.
- z1kzonly
- Offline
- User
- Sustaining Member
Less
More
- Posts: 2892
- Thank you received: 542
07 Jul 2022 15:46 - 07 Jul 2022 15:47 #870022
by z1kzonly
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Replied by z1kzonly on topic Foot Peg Studs???
The ebay item id given is invalid, no result has been sentNo eBay APP ID and/or Cert ID defined in Kunena configurationYes a thin jam nut behind. Threads are a 10mm 1.0 fine thread.
A bolt will bolt right in. These are for a Z1/ KZ900 frame.
I have these quick homemade pegs on ebay right now.
A bolt will bolt right in. These are for a Z1/ KZ900 frame.
I have these quick homemade pegs on ebay right now.
Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!
Last edit: 07 Jul 2022 15:47 by z1kzonly.
Please Log in or Create an account to join the conversation.