- Posts: 2835
- Thank you received: 689
Finally Fixed My Droppy Seat
- daveo
- Topic Author
- Offline
- Premium Member
Less
More
09 May 2023 14:17 - 09 May 2023 20:02 #884448
by daveo
1982 KZ1100-A2
Finally Fixed My Droppy Seat was created by daveo
Anyone else have a seat prop that refuses to hold the seat up when the bike is parked on the side-stand?
The seat has never stayed up unless a hand holds it there...
It's a split second woosh from up to full down, and latched!
The seat has never stayed up unless a hand holds it there...
It's a split second woosh from up to full down, and latched!
1982 KZ1100-A2
Last edit: 09 May 2023 20:02 by daveo.
Please Log in or Create an account to join the conversation.
- Scirocco
- Offline
- Premium Member
- Never change a running system
Less
More
- Posts: 4252
- Thank you received: 2105
09 May 2023 15:18 #884451
by Scirocco
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Replied by Scirocco on topic Finally Fixed My Droppy Seat
The side stand bike lean angle is not the right position for the seat up self lock. The bike service position is only on the main stand!
My 1975 Z 1 B 900 Project
www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
The following user(s) said Thank You: daveo
Please Log in or Create an account to join the conversation.
- daveo
- Topic Author
- Offline
- Premium Member
Less
More
- Posts: 2835
- Thank you received: 689
09 May 2023 17:24 - 09 May 2023 20:10 #884457
by daveo
1982 KZ1100-A2
Replied by daveo on topic Finally Fixed My Droppy Seat
So my 40+ year old problem is the norm...not an exception.
Well, then my most-simple solution works better for both positions!
I removed the center-stand for daily riding, and keep it handy for the occasional oil/oil filter and fork fluid change, and wheel removal for tires, etc.
Takes two-three minutes tops to partly bolt it on, and up she goes.
Rides are nicer without the awkward-heavy, extra weight that wants to scrape the pothole-ridden pavement. Much better without it...
One set of seat-hinge pins is next...
.
Well, then my most-simple solution works better for both positions!
I removed the center-stand for daily riding, and keep it handy for the occasional oil/oil filter and fork fluid change, and wheel removal for tires, etc.
Takes two-three minutes tops to partly bolt it on, and up she goes.
Rides are nicer without the awkward-heavy, extra weight that wants to scrape the pothole-ridden pavement. Much better without it...
One set of seat-hinge pins is next...
.
1982 KZ1100-A2
Last edit: 09 May 2023 20:10 by daveo.
Please Log in or Create an account to join the conversation.
- willemZ900
- Offline
- User
- Z1B 4 ever
Less
More
- Posts: 191
- Thank you received: 57
10 May 2023 03:30 #884469
by willemZ900
Replied by willemZ900 on topic Finally Fixed My Droppy Seat
The following user(s) said Thank You: daveo
Please Log in or Create an account to join the conversation.
- sf4t7
- Offline
- Sustaining Member
Less
More
- Posts: 590
- Thank you received: 383
10 May 2023 04:47 #884470
by sf4t7
Scotty
1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
Replied by sf4t7 on topic Finally Fixed My Droppy Seat
Same here. My center stand became a shop tool a long time ago!
Scotty
Scotty
Scotty
1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion
The following user(s) said Thank You: daveo
Please Log in or Create an account to join the conversation.