Petcock with gray spigot leaking ...

More
07 Sep 2024 10:22 #904063 by Fox
Hello,

i would lik to restore a kz1000 petcock with a gray spigot but this spigot is leaking.
I can move or remove this spigot easy ... is it notmal?
Do i need an o-ring on this spigot or any sceller ?
Do i have to use a hammer to fix it ... ?

Thank you 

1978 KZ1000-B2 LTD
1977 kz1000-B1 LTD

Please Log in or Create an account to join the conversation.

  • gd4now
  • Offline
  • User
  • Denco where did you go?
More
07 Sep 2024 10:50 #904064 by gd4now
Replied by gd4now on topic Petcock with gray spigot leaking ...
Yes there is an o-ring on it and a set screw to locate it and allow for movement. 
The pics I have are for a some what like petcock from a 77 KZ650 which shows these.

1977 KZ650 B1
Pods and Denco header


OLD KAW OWNERS SMILE ALOT

The following user(s) said Thank You: Fox

Please Log in or Create an account to join the conversation.

More
07 Sep 2024 11:01 - 07 Sep 2024 11:02 #904065 by Fox
Replied by Fox on topic Petcock with gray spigot leaking ...
Hello,

thank you for your reply but tit don't leak from the lever but from the spigot  (on the left on the picture)

1978 KZ1000-B2 LTD
1977 kz1000-B1 LTD
Last edit: 07 Sep 2024 11:02 by Fox.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
07 Sep 2024 13:47 #904076 by SWest
Replied by SWest on topic Petcock with gray spigot leaking ...
It should be a tight fit. A few light taps with a hammer might do it. If not I used a smear of JB weld to seal them. Taking a sharp punch in a few places around it could tighten it up too. I did both.
The following user(s) said Thank You: Fox

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum