A little progress with my chop....pics

More
10 Aug 2006 21:37 #68661 by Torch
Figured i would toss up a quick pic of my bob/drag bike progress. Before anyone says anything, those peices of plate are only for temporary struts to move around the shop with....still waiting on my 10.5" springs.

Im going to move the electronics inboard and make my own flat side covers and seat pan all one peice. Im still undecided if im going to run a rear fender or not...im leaning more towards the not. Im still not done sanding down the cooling fins as you can tell in the pic, but the engine looks a heck of alot better painted. The paint scheme is going to be flat black with old school hot rod pinstripping. The headlight is probably going to be replaced with a rectangular one, just to be different and i think it will flow a little better with the straight line design i have.

The engine is going to have a single 40mm carb and im just going to run my header with a turnout to get the exhaust away from my foot. Im still a pretty long way from completion, but atleast its starting to take form from what i have in my brain. Anyway, post up whatever questions and comments you have....

Post edited by: Torch, at: 2006/08/11 00:40
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Aug 2006 04:25 #68686 by roy-b-boy-b
Replied by roy-b-boy-b on topic A little progress with my chop....pics
That's one bike i could sit on flat footed. Roy

1979 LTD Street Fighter.1977 KZ1000

Please Log in or Create an account to join the conversation.

More
11 Aug 2006 19:31 #68845 by Torch
Replied by Torch on topic A little progress with my chop....pics
roy-b-boy-b wrote:

That's one bike i could sit on flat footed. Roy


Yeah, i think just about anyone could sit on there flatfooted....lol. I can stand next to the bike and where my seat will be is just above my knee's.

Please Log in or Create an account to join the conversation.

More
11 Aug 2006 21:02 #68860 by kawtoy
Replied by kawtoy on topic A little progress with my chop....pics
I would seriously think about putting a rrar fender on. Nothing more "uncool" that pulling up at the bar and having a big splatter pattern down your back from the puddle you rode thru. Even if you don't ride in the rain you will still hit puddles, tar, mud, gravel and other crap that will fly up and hit you in the back. It will also get the bike very dirty.

Harley Davidson- Turning gas into noise without the harmful affects of horsepower for over 100 years.

Please Log in or Create an account to join the conversation.

More
12 Aug 2006 12:42 #68963 by Torch
Replied by Torch on topic A little progress with my chop....pics
kawtoy wrote:

I would seriously think about putting a rrar fender on. Nothing more "uncool" that pulling up at the bar and having a big splatter pattern down your back from the puddle you rode thru. Even if you don't ride in the rain you will still hit puddles, tar, mud, gravel and other crap that will fly up and hit you in the back. It will also get the bike very dirty.


Flat black paint...no chrome...not worried about bike getting dirty. As for me, im a diesel mechanic...most of the time after work you can't tell what race i am...lol.

I thought about maybe making a flat fender out of one from a trailer, but only making it come about half way over the top of the tire and swingarm mounting it with about 1/4" of clearance.

Please Log in or Create an account to join the conversation.

More
23 Aug 2006 09:07 #71818 by Rickman
Replied by Rickman on topic A little progress with my chop....pics
get yer new headlight low down on the forks, give it a more hungry look.

I don't know what it is about leaving off the rear fender, but I too find it an intriguing look for some reason!

1983 KZ1100-L1 "LTD Shaft"
Wiseco 10.5:1 1171 piston kit, bored by APE
Dyna 2000, Dyna S, Dyna grey coils, WG coil power mod, CB900 starter

Please Log in or Create an account to join the conversation.

More
23 Aug 2006 10:14 #71835 by JUSTICE114
Replied by JUSTICE114 on topic A little progress with my chop....pics
Nice Bike Bro! Go half way with the rear fender, it'll still look tight and you'll be protected. ;) Just keep in mind that what EVER you run over will be slung on to your back and i dont think a NAIL at 75mph will feel all that great when it sticks ya in the back. :pinch: If you could get some better pics, that'd be great!:) I wanna better look at the beast.B)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum