Got her on the road!

More
03 Mar 2007 07:33 #116933 by Exitpupil
Got her on the road! was created by Exitpupil
Hello,
I joined last summer when I bought a 79 KZ1000. I bought it off ebay. The bike was represented in the ad and by phone conversation as 4400 miles, stored for 20 years and a frame off complete restoration as just being completed. "Ready to ride cross country" the guy said. As soon as I heard that phrase I should have know better LOL. I drove 4 hours to pick up the bike and the frame off restoration was clean out the gas tank and spray bomb some rust on the frame! The tires and chain O rings were shot, paint was bubbling up on the tank, fork seals leaked, rear shocks locked up, carbs gummed up, etc. The good news it only had 4400 actual miles and still had the break in sticker on the tach! I beat the price down and bought it anyway. I called in a favor and had a friend repaint it. I repalced shocks, front fork seals and springs, new tires, installed a 1075 overbore kit, ported my head, K410 cams, BS34 carbs, new chain, shortened the turn signals, lowered 1 inch, well you get the picture. Finally got the jetting close today so I am ready to ride! Best of all I know my bike inside and out.
Will P in NC mountains
i53.photobucket.com/albums/g55/exitpupil/DSC03438.jpg
i53.photobucket.com/albums/g55/exitpupil/DSC03439.jpg

79 KZ1000 LTD B3, 1075 kit, BS34 carbs, high velocity ported heads, K410 cams, V&H pipe w/custom baffle

Please Log in or Create an account to join the conversation.

  • The Gringo
  • Offline
  • User
  • ¡Usted no necesita otra motocicleta!
More
03 Mar 2007 08:14 #116942 by The Gringo
Replied by The Gringo on topic Got her on the road!
Will congrats on a really nice job. That bike looks fantastic, I always liked the 77-80 LTD 1000's. I'll get another one before it is all said and done. With the low miles and all the work you performed that 28 yr. old Kaw should last another 28 yrs. no problem.

I see you worked out how to connect the BS 34 carbs to a factory airbox, seems to me someone was asking about that in the last week or so here, you may want to enlighten us here how you did it. I think you are going to enjoy this summer big time.

Andy
Akron, Ohio
80 Z-1 Classic-Sold
84 GPZ1100
79 KZ 1000 LTD
78 KZ 1000 A2
77 KZ 1000 LTD-Sold
76 KZ 900 The definition of a barn find
76 KZ 900-Sold gone to Denmark
KZ 750 times 3, KZ 650 times 8 Sold 1 down to 7
KZ 550 times 2 80 440LTD-Sold
81 CSR 305-Sold 81 Yamaha XS650 Special

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 08:34 #116948 by Exitpupil
Replied by Exitpupil on topic Got her on the road!
To use a factory airbox with BS34 carbs I bought a 750E Kaw airbox and boots from ebay for $18. The airbox WILL NOT fit into the 1000 frame. I used the boots though. I usd the 750 airbox to trace the hole pattern then used a dremel to enlarge the 1000 airbox boot holes. The two inside holes don't match up perfect, leaving about a 1/8" gap, but the boot barley covers the gap. If you were concerned silcone could be used to fill the gap. Lacking the airbox as a pattern the holes are equal distant on the 750. The 1000 airbox requires removal of the spark arreator screens and most of their attachment materal inside the airbox as well. So just open up the holes and use the 34 carb boots. I switched to a K&N filter for the airbox too.

if anyone wants the hole tracing I could mail them one.

79 KZ1000 LTD B3, 1075 kit, BS34 carbs, high velocity ported heads, K410 cams, V&H pipe w/custom baffle

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 08:54 #116952 by Mcdroid
Replied by Mcdroid on topic Got her on the road!
Nice Will, thanks for sharing:)

Michael
Victoria, Texas

1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A

Please Log in or Create an account to join the conversation.

More
03 Mar 2007 08:57 #116954 by mariozappa
Replied by mariozappa on topic Got her on the road!
Nicely done.

Are those Sportster shocks?

What kind of paint did you use on the lower forks?

1977 KZ650C1
and the KZ650/KZ750 Conversion ;)

Please Log in or Create an account to join the conversation.

  • guitargeek
  • Offline
  • User
  • Elitist, arrogant, intolerant, self absorbed.
More
03 Mar 2007 10:16 #116982 by guitargeek
Replied by guitargeek on topic Got her on the road!
Hey, got any pics of the port work on your head?

1980 KZ750-H1 (slightly altered)
1987 KZ1000-P6 "Ponch"
1979 GS1000 "Dadzuki"

Please Log in or Create an account to join the conversation.

  • RetroRiceRocketRider
  • Offline
  • User
  • ...bring in the machine that goes PING!
More
03 Mar 2007 11:14 #116997 by RetroRiceRocketRider
Replied by RetroRiceRocketRider on topic Got her on the road!
Wow, simply beautiful! B)

Does the exhaust pipe (Mac I believe) have to be removed to change the oil and filter?


With all that work, I bet she really moves! :)

Covina, So Calif!
78 KZ650-B2 = SOLD
84 ZN700 LTD = SOLD
84 ZX750 GPz = SOLD
89 GSX1100F Katana = SLEEPING :-/
20 VN1700 Vulcan Vaquero (the Blue Cowboy)
Looking for my next project KZ

Please Log in or Create an account to join the conversation.

  • pstrbrc
  • Offline
  • User
  • '81 GPz 1100 project
More
03 Mar 2007 11:56 #117007 by pstrbrc
Replied by pstrbrc on topic Got her on the road!
Exitpupil wrote:

Best of all I know my bike inside and out.

EXACTLY!! Great job, man! Enjoy the ride!:)

\'81 GPz 1100 project
Elkhart, Kansas USA
\"Man does not control his own fate. The women in his life do that for him.\" Groucho Marx

Please Log in or Create an account to join the conversation.

More
13 Mar 2007 08:06 #119762 by Exitpupil
Replied by Exitpupil on topic Got her on the road!
I do not have to remove the exhaust to access the oil filter.

The shocks are KZ 750. They are 1" shorter than stock so I dropped the front forks 1" in the triple tree. The shocks (Progressive) came with bushings to adapt to my frame. I did have to cut a small piece out of the chain guard for clearance on the shock.

I have no photos of the porting. However I followed Larry's advice in the engine forum. He posted photos. He did the calculations for my bike and gave the deminsions the ports should be. I followed them almost exactly. When I CC'd the port volumes I ended up going about 1 mm over his ideal recommendation, but still in the parameters, to get the volumes equal (my inexperience). His advice to go slow can't be overemphasized.

Post edited by: Exitpupil, at: 2007/03/13 11:09

Post edited by: Exitpupil, at: 2007/03/13 11:28

79 KZ1000 LTD B3, 1075 kit, BS34 carbs, high velocity ported heads, K410 cams, V&H pipe w/custom baffle

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum