- Posts: 2
- Thank you received: 0
New Guy
- jso2267
- Topic Author
- Offline
- User
Less
More
27 Dec 2007 06:56 #186536
by jso2267
New Guy was created by jso2267
Hello to all. Jeff from Minnesota here. Lot's of great info on this forum. Thanks to everyone who has helped me without knowing it. I've been able to search to old posts and get the answers I needed.
Here's my current project. When I got this old girl she was pretty beat up. The bars, lights, gauges and tank were all smashed and the rear of the frame had a nice twist to it.
The original idea was to part her out but after I shockingly got more than the purchase price selling her passenger grab rails on eBay I thought I'd try to give her a new life.
Mods so far:
Frame is now rigid, 4 inches longer and sits about two inches lower than stock.
Bars are off of a police KZ.
Tank is, I believe, from a KZ 750 twin.
Rear fender is off of a 70's Honda CB and was chopped about 6 inches.
Seat is a cheapo off of eBay.
Forward pegs.
Right hand tank shifter.
Shortened kickstand 1ΒΌ".
Side mounted Model-A tail light.
Not shown in the pics is a vented mock oil tank mounted under the seat which holds the electronics.
Not trying to offend any purists here. I just couldn't see letting such a well built bike fade away. She'll never be a show-piece but that's not the goal here. Bringing her back from the dead and getting her to run like a top is.
My other girl is a '05 Yamaha Road Star. Yeah, I'm old, fat and my ramp rocket days are long gone.
Take care all and thanks again,
Jeff
Here's my current project. When I got this old girl she was pretty beat up. The bars, lights, gauges and tank were all smashed and the rear of the frame had a nice twist to it.
The original idea was to part her out but after I shockingly got more than the purchase price selling her passenger grab rails on eBay I thought I'd try to give her a new life.
Mods so far:
Frame is now rigid, 4 inches longer and sits about two inches lower than stock.
Bars are off of a police KZ.
Tank is, I believe, from a KZ 750 twin.
Rear fender is off of a 70's Honda CB and was chopped about 6 inches.
Seat is a cheapo off of eBay.
Forward pegs.
Right hand tank shifter.
Shortened kickstand 1ΒΌ".
Side mounted Model-A tail light.
Not shown in the pics is a vented mock oil tank mounted under the seat which holds the electronics.
Not trying to offend any purists here. I just couldn't see letting such a well built bike fade away. She'll never be a show-piece but that's not the goal here. Bringing her back from the dead and getting her to run like a top is.
My other girl is a '05 Yamaha Road Star. Yeah, I'm old, fat and my ramp rocket days are long gone.
Take care all and thanks again,
Jeff
Please Log in or Create an account to join the conversation.
- bill_wilcox100
- Offline
- User
Less
More
- Posts: 1115
- Thank you received: 5
27 Dec 2007 07:25 #186542
by bill_wilcox100
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Replied by bill_wilcox100 on topic New Guy
Welcome to the site Jeff. Nice to hear that all the goings on here have been useful to you already. Looks like you're having fun with this project.
By the way, any chance of getting your year, model and location in your signature. I was not able to figure it out from your message or your picture. Helps to get relevant feedback too.
Best of success!
By the way, any chance of getting your year, model and location in your signature. I was not able to figure it out from your message or your picture. Helps to get relevant feedback too.
Best of success!
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Please Log in or Create an account to join the conversation.
- jso2267
- Topic Author
- Offline
- User
Less
More
- Posts: 2
- Thank you received: 0
27 Dec 2007 07:41 #186545
by jso2267
Replied by jso2267 on topic New Guy
Thanks and it has been a blast to build. Lots of little tabs and brackets and what-not to fabricate.
Sorry about the sig not being set up. didn't know where it was but it is now. As you can see I'm a total rookie on this board. Even got a double post. :blush: :laugh:
By the way. I got the KZ650B off the title but how do I tell if my bike is a B1, B2, etc? Is this related to the year?
Post edited by: jso2267, at: 2007/12/27 10:57
Sorry about the sig not being set up. didn't know where it was but it is now. As you can see I'm a total rookie on this board. Even got a double post. :blush: :laugh:
By the way. I got the KZ650B off the title but how do I tell if my bike is a B1, B2, etc? Is this related to the year?
Post edited by: jso2267, at: 2007/12/27 10:57
Please Log in or Create an account to join the conversation.
- bill_wilcox100
- Offline
- User
Less
More
- Posts: 1115
- Thank you received: 5
27 Dec 2007 07:55 #186546
by bill_wilcox100
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Replied by bill_wilcox100 on topic New Guy
Jeff, don't worry about it! If you've never double posted chances are you never posed at all. Don't ask me how I know. :blush:
Another KZ650 on the site... cool. I bust everyone's ball bearings about the signature thing... its because of my deteriorating eye sight I guess and not because I'm anal or anything... or maybe there're related?
Enjoy the cast of characters here and best of success.
Another KZ650 on the site... cool. I bust everyone's ball bearings about the signature thing... its because of my deteriorating eye sight I guess and not because I'm anal or anything... or maybe there're related?
Enjoy the cast of characters here and best of success.
1977 KZ650-B1 (Stock)
Upgrades:
- Dyna S Electronic Ignition (DS2-2)
- Dyna 3 Ohm Coils (DC1-1)
- Coil Repowering Mod
- Progressive Springs Front & Rear
- Saddlemen Seat Cover
- New Metallic Red Re-Paint & Repro Badges.
Montreal, Canada
Please Log in or Create an account to join the conversation.
- mariozappa
- Offline
- User
Less
More
- Posts: 901
- Thank you received: 8
27 Dec 2007 09:55 #186557
by mariozappa
1977 KZ650C1
and the KZ650/KZ750 Conversion
Replied by mariozappa on topic New Guy
ENGINE #
KZ650-B1 1977 KZ650BE000001 ~ KZ650BE007860
(K)Z650-B2 1978 KZ650BE0460001 ~ KZ650BE027501
(K)Z650-B3 1979 KZ650BE092001 ~
FRAME #
B1 KZ650B-000001 ~ KZ650B-500001
B2 KZ650B-046873 ~ KZ650B-508016
B3 KZ650B-046201 ~
KZ650-B1 1977 KZ650BE000001 ~ KZ650BE007860
(K)Z650-B2 1978 KZ650BE0460001 ~ KZ650BE027501
(K)Z650-B3 1979 KZ650BE092001 ~
FRAME #
B1 KZ650B-000001 ~ KZ650B-500001
B2 KZ650B-046873 ~ KZ650B-508016
B3 KZ650B-046201 ~
1977 KZ650C1
and the KZ650/KZ750 Conversion
Please Log in or Create an account to join the conversation.
- Tony
- Offline
- KZr Legend
Less
More
- Posts: 1351
- Thank you received: 13
27 Dec 2007 23:52 #186676
by Tony
Replied by Tony on topic New Guy
Welcome to KZR jso2267. Good luck with your project.
Please Log in or Create an account to join the conversation.