- Posts: 6
- Thank you received: 0
Hi from Dorset England
- murto
- Topic Author
- Offline
- User
Please Log in or Create an account to join the conversation.
- Nebr_Rex
- Offline
- User
- Posts: 1903
- Thank you received: 300
Come on in and catch the desease.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected
www.dotheton.com/forum/index.php?topic=39120.0
.
Please Log in or Create an account to join the conversation.
- Mcdroid
- Offline
- User
- Gone Kwackers
- Posts: 6638
- Thank you received: 318
Michael
Victoria, Texas
1982 GPz750
1977 KZ1000A
1978 KZ1000A
1982 GPz1100
1975 Z2A
Please Log in or Create an account to join the conversation.
- trianglelaguna
- Offline
- User
- New and improved - extra strength
- Posts: 8726
- Thank you received: 235
welcome
1976 KZ900
2003 ZX12R
2007 FZ1000
2004 ninja 250R for wife
Please Log in or Create an account to join the conversation.
- kzr750r1
- Offline
- User
- Posts: 447
- Thank you received: 9
Interesting animal you have there. Is that the stock paint scheme? I have never seen this one before on a 750 of that year, understood your in the UK. Other interesting item is the left side exit 4 to 1. Don't see that often either.
Would like to see a pick of the left side, very well preserved (although used) for its age.
Cheers
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- murto
- Topic Author
- Offline
- User
- Posts: 6
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- kzr750r1
- Offline
- User
- Posts: 447
- Thank you received: 9
If you get a chance could you measure your fork tube diameter? Also tube offset from the stem. Close enough on the offset, were off by 1 or 2 mm I'm sure they are probably the same.
Want to see if this top clamp can cross over to mine. I think it can by the PN but always nice to have some live confirmation.
Nice to see some of these come out of the woodwork. 750s are like early station wagons. Ridden hard and put away wet one too many times to survive.
Cheers.
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- murto
- Topic Author
- Offline
- User
- Posts: 6
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- murto
- Topic Author
- Offline
- User
- Posts: 6
- Thank you received: 0
Thanks, look forward to seeing your tune up. Have fun.
If you get a chance could you measure your fork tube diameter? Also tube offset from the stem. Close enough on the offset, were off by 1 or 2 mm I'm sure they are probably the same.
Want to see if this top clamp can cross over to mine. I think it can by the PN but always nice to have some live confirmation.
Nice to see some of these come out of the woodwork. 750s are like early station wagons. Ridden hard and put away wet one too many times to survive.
Cheers.
I'm actually in the middle of renewing my forks and they are not on the bike at the moment but the fork tube diameter appears to be 36mm, I hope this helps for now.
Please Log in or Create an account to join the conversation.
- kzr750r1
- Offline
- User
- Posts: 447
- Thank you received: 9
KZ750R1 + 1991 ZR750 = KZR750R1
Better to be shot out of a cannon then squeezed through a tube. - HST
Please Log in or Create an account to join the conversation.
- Mike favacchia
- Offline
- User
- Posts: 10
- Thank you received: 0
Chopped 83 750LTD_F
Please Log in or Create an account to join the conversation.