- Posts: 194
- Thank you received: 42
1980 project.
- mark1122
-
- Offline
- User
- Keep twisting it
18 Oct 2012 22:55 #554600
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic 1980 project.
That last pic looks like a million dollar pipe.
very nice.
very nice.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- DoctoRot
-
- Offline
- Sustaining Member
- Oh, the usual... I bowl, I drive around...
- mark1122
-
- Offline
- User
- Keep twisting it
19 Oct 2012 07:28 #554647
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic 1980 project.
WOW that bike is mint.
Very nice.
Very nice.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- 531blackbanshee
-
- Offline
- Vendor
- KZ250LTD
-
- Offline
- User
- 750steve
-
- Offline
- User
- mark1122
-
- Offline
- User
- Keep twisting it
13 Nov 2012 13:47 #558199
by mark1122
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Replied by mark1122 on topic 1980 project.
I was just looking back at some of your Awesome, bike pics. u may want to drill a drain hole in the side frame triangle gussets to let water out, unless u have another plan?? just a thought.
i see u have a low profile crankcase vent cover. these were made for the drag racers, so they could make room to fit bigger carbs or turbos. when they block off this vent, they would add a vent elswhere. just a heads up for the need to vent properly. u may get too much oil if u try to vent there.
great job.
i see u have a low profile crankcase vent cover. these were made for the drag racers, so they could make room to fit bigger carbs or turbos. when they block off this vent, they would add a vent elswhere. just a heads up for the need to vent properly. u may get too much oil if u try to vent there.
great job.
76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.
~ ~ ~_@
~ ~ _- \,
~ (k) / (z)
Please Log in or Create an account to join the conversation.
- tk11b40
-
- Offline
- User
- boatdrinks
-
- Offline
- User