Retroactive KZ750E Project Thread

More
04 Aug 2017 14:01 #768320 by 650ed
Replied by 650ed on topic Retroactive KZ750E Project Thread
No eBay APP ID and/or Cert ID defined in Kunena configurationYes indeed. In fact, you can buy a 256gb SanDisk thumb (flash) drive for $50 (see below). So for $400 a year you could buy 2 terabytes of storage every year!

I switched to Imgur a couple years ago when PB started sticking pop-ups all over everything and slowed their site way down. Imgur is free, easy to use, and fast. Of course I keep photos on my own media in case Imgur decides to follow the PB example. Ed


1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

More
04 Aug 2017 14:08 #768321 by TexasKZ
Replied by TexasKZ on topic Retroactive KZ750E Project Thread

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

More
04 Aug 2017 14:19 #768323 by 650ed
Replied by 650ed on topic Retroactive KZ750E Project Thread

TexasKZ wrote: Or if you need a bit more storage.......

www.bestbuy.com/site/seagate-backup-plus...4503.p?skuId=2944503


Excellent point! In fact, using the Seagate product one can buy 15 terabytes of storage (3 * 5 tb) for the cost of one year's PB fee! Ed

www.amazon.com/Seagate-Backup-Portable-E...0/dp/B01LZP2B23?th=1

1977 KZ650-C1 Original Owner - Stock (with additional invisible FIAMM horn)

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
04 Aug 2017 14:28 - 04 Aug 2017 14:39 #768324 by Scirocco
Replied by Scirocco on topic Retroactive KZ750E Project Thread
$400/year, never. Buy a cheap NAS and a free DynDNS account and get free access to your pics world wide for $100 for a live span.
NAS with Raspberry Pi cost under $100
Last edit: 04 Aug 2017 14:39 by Scirocco.
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
04 Aug 2017 15:07 #768327 by Nessism
Replied by Nessism on topic Retroactive KZ750E Project Thread

Scirocco wrote: $400/year, never. Buy a cheap NAS and a free DynDNS account and get free access to your pics world wide for $100 for a live span.
NAS with Raspberry Pi cost under $100


This is an option! For now I'm all set with Flickr though.

I've got plenty of home storage space, but webhosting is what I didn't have (thus the use of Photobucket and now Flickr).

Please Log in or Create an account to join the conversation.

More
04 Aug 2017 15:15 #768331 by martin_csr
Replied by martin_csr on topic Retroactive KZ750E Project Thread
Was it very difficult or time consuming restoring all of the photos in this topic?

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
04 Aug 2017 16:39 #768336 by Nessism
Replied by Nessism on topic Retroactive KZ750E Project Thread

martin_csr wrote: Was it very difficult or time consuming restoring all of the photos in this topic?


Yes. Had to find the original photo, post on flickr, then come back and cut and paste each link. Photobucket has a better user interface compared to flickr. This site is quirky too since it reads each flickr/photobucket link as several links even when it's only one. Have to parse down the link to the bare minimum or the site will think you posted a lot more photos than you are.

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
06 Aug 2017 09:59 - 18 Aug 2017 13:46 #768446 by Nessism
Replied by Nessism on topic Retroactive KZ750E Project Thread
One of my last projects with this bike was to update the gauges. As shown earlier in the thread I cleaned up the housings and the gauges looked nice and all, however, the needles sort of wobbled around more than I liked. Did a deep dive on gauge part numbers and got all kinds of confused. Kawasaki used a bunch of different part number gauges which threw me for a loop. The 550's used the same gauges on at least some years too which increased confusion.

In the end I've come to realize that the E2/3 bikes use a different tach than the E1 in that has a "headlamp" warning light built in. . The gauges for my bike have a black bezel around the face but some other bikes came with green bezel gauges. I found a NOS tach with a black bezel but the only speedo I could find has a green bezel. Guess I'll have to open up one of them to swap things around to get them to match. Later though...

Sorry for all the photo glare...







Last edit: 18 Aug 2017 13:46 by Nessism.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
06 Aug 2017 10:08 #768447 by SWest

Please Log in or Create an account to join the conversation.

More
17 Aug 2017 12:41 #769158 by Ed_in_Miami
Replied by Ed_in_Miami on topic Retroactive KZ750E Project Thread
Looks amazing..
My hamfisted attempt at rebuilding my gauges left me with both broken needles...
I had to devise a crafty replacement, but definitely ended up with a NON-OEM look...

Nessism wrote: One of my last projects with this bike was to update the gauges. As shown earlier in the thread I cleaned up the housings and the gauges looked nice and all, however, the needles sort of wobbled around more than I liked. Did a deep dive on gauge part numbers and got all kinds of confused. Kawasaki used a couple different part number gauges which threw me for a loop. The 550's used the same size gauges too which increased confusion.

In the end I've come to realize that the E2 bikes use a somewhat unique tach that has the "headlamp" warning light built in. This gauge also uses a black gauge bezel inside the housing. The speedometer for my bike also has a matching black bezel. I found a NOS tach which is correct but couldn't find a speedo. The speedo I bought has a green bezel so the gauges don't match. Guess I'll have to open my new speedo and paint the bezel. It's just that I've got heartburn opening a NOS gauge that I paid so much for.

Sorry for all the photo glare...








This is my build:
kzrider.com/forum/11-projects/600312-ano...rtment-build?start=0
There are many more like it, but this one is mine... news to come!

Please Log in or Create an account to join the conversation.

More
01 Oct 2017 13:44 - 01 Oct 2017 13:45 #772115 by old_kaw
Replied by old_kaw on topic Retroactive KZ750E Project Thread

Nessism wrote: One of my last projects with this bike was to update the gauges. As shown earlier in the thread I cleaned up the housings and the gauges looked nice and all, however, the needles sort of wobbled around more than I liked. Did a deep dive on gauge part numbers and got all kinds of confused. Kawasaki used a bunch of different part number gauges which threw me for a loop. The 550's used the same gauges on at least some years too which increased confusion.

In the end I've come to realize that the E2/3 bikes use a different tach than the E1 in that has a "headlamp" warning light built in. . The gauges for my bike have a black bezel around the face but some other bikes came with green bezel gauges. I found a NOS tach with a black bezel but the only speedo I could find has a green bezel. Guess I'll have to open up one of them to swap things around to get them to match. Later though...

Sorry for all the photo glare...


That is just an amazing job you did on this restoration. I do agree with the brittle engine paint chipping and it kinda makes all the prep work that it takes to make things look this nice, all a waste IMHO. I used an epoxy appliance black rattle can on my seat pan and front master cylinder.. and it looks great when I open my seat, but my front master cylinder looks like crap.. again. It doesn't hold up to brake fluid.

I love what you did with the gauges. You pried these open, then resealed them again? I hate the thought, but have done it myself on a XS1100 I brought back to life. It is hard to get the rings back on, then made to look right. Any pointers on this? I need to disassemble my tach, and would love to find a way to modify my speedo into a 160mph instrument for obvious reasons.


1981 Kawasaki Kz1000K1
Located in the Saint Louis, Missouri Area.
Attachments:
Last edit: 01 Oct 2017 13:45 by old_kaw.

Please Log in or Create an account to join the conversation.

  • Nessism
  • Topic Author
  • Offline
  • Sustaining Member
More
01 Oct 2017 15:19 #772121 by Nessism
Replied by Nessism on topic Retroactive KZ750E Project Thread

old_kaw wrote: That is just an amazing job you did on this restoration. I do agree with the brittle engine paint chipping and it kinda makes all the prep work that it takes to make things look this nice, all a waste IMHO. I used an epoxy appliance black rattle can on my seat pan and front master cylinder.. and it looks great when I open my seat, but my front master cylinder looks like crap.. again. It doesn't hold up to brake fluid.

I love what you did with the gauges. You pried these open, then resealed them again? I hate the thought, but have done it myself on a XS1100 I brought back to life. It is hard to get the rings back on, then made to look right. Any pointers on this? I need to disassemble my tach, and would love to find a way to modify my speedo into a 160mph instrument for obvious reasons.


Thanks for the kudos!

I pried open the original gauges and restored them. There are photos showing the process earlier in the thread; basically take a small screwdriver and pry a little at a time and work around and around. Took about 4 times around prying as you go. To seal them back up all you have to do is tap the ring back down. The gauge has a rubber seal to keep out water.

I haven't opened up the new gauges yet to fix the bezel color mismatch.

I can't advise on how to mod the gauge other than you may be able to transplant the guts of one gauge inside your original housings. If you go down that road please post some photos showing the process.:)

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum