Help Me get going, 1981 KZ750 LTD

More
06 Oct 2024 12:04 - 06 Oct 2024 14:28 #904901 by SnyperX
Help Me get going, 1981 KZ750 LTD was created by SnyperX
So you may have saw my previous post on possibly picking up a 1981 KZ750 LTD for $400. I got the bike Friday and got it home. Bike has the carbs, but not installed on the bike. Owner stated bike had run a couple of years back. I am looking to leverage this forum to help with the build. This is my first project bike purchase.

Current state of the bike after getting it home.



My vision for the bike over the Winter.


Regards,
SnyperX

====================
1981 KZ750H2 LTD
Last edit: 06 Oct 2024 14:28 by SnyperX.

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
06 Oct 2024 14:27 #904905 by Wookie58

Please Log in or Create an account to join the conversation.

More
06 Oct 2024 16:36 #904911 by sf4t7
Replied by sf4t7 on topic Help Me get going, 1981 KZ750 LTD
It seems to be complete, that will save you a lot of time - you won't have to do as much shopping.  🙂
btw, we love pictures 
 


Scotty

1974 Z1A
1015
welded Z1 crank
Andrews 1X Cams
Delkevic 4 into 1
Superbike bars
530 conversion

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
06 Oct 2024 18:33 #904913 by SWest

Please Log in or Create an account to join the conversation.

More
06 Oct 2024 18:54 #904915 by SnyperX
Replied by SnyperX on topic Help Me get going, 1981 KZ750 LTD

How long and where did it sit with the carbs OFF/
 
as far as I know it was in the sellers garage. I am not sure on how long the carbs have been off.

Regards,
SnyperX

====================
1981 KZ750H2 LTD

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
06 Oct 2024 21:01 #904916 by SWest
Replied by SWest on topic Help Me get going, 1981 KZ750 LTD
I'd vac it out then put a little oil in each cylinder before turning it over.
Steve
The following user(s) said Thank You: SnyperX

Please Log in or Create an account to join the conversation.

More
08 Oct 2024 07:28 #904952 by Nessism
Replied by Nessism on topic Help Me get going, 1981 KZ750 LTD
Good luck with your project.  My signature has several links you may find useful.  Most specifically, new owner things to know, and a source for carb O-rings.  Don't be tempted to buy "carb kits", do a full teardown and replace the O-rings.  That should be all you need, other than, maybe, float valve needles.  

Good luck again.
The following user(s) said Thank You: SnyperX

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum