Feeler gauge

  • gordone
  • Topic Author
  • Offline
  • Sustaining Member
More
06 Nov 2018 12:31 #793470 by gordone
Feeler gauge was created by gordone
I have a feeler gauge bought local shop, I think it`s for car, I need to use two gauge on top each other some times to get correct tightness.

Do you know about a place I can order a one who is good for checking valve clearness on Kawasaki engines ?
1981 KZ650-D4, with 1981 z750L engine (Wiensco 810 big bore).

Project:
www.kzrider.com/forum/11-projects/607213...sr-1981-z750l-engine

Please Log in or Create an account to join the conversation.

More
06 Nov 2018 13:16 #793474 by davido
Replied by davido on topic Feeler gauge
Try these people. Cheap and cheerful.
www.louis.eu/artikel/feeler-gauge-9-blade-0-04-0-3-mm/10003975
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
06 Nov 2018 14:53 #793477 by TexasKZ
Replied by TexasKZ on topic Feeler gauge
I bought one from NAPA for less than $10.
1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
06 Nov 2018 15:12 - 06 Nov 2018 15:14 #793479 by Scirocco
Replied by Scirocco on topic Feeler gauge
I bought these feeler gauges

www.woembi.de/Fuehlerlehre-003-010-8-Blatt

8 blades in 1/100 mm steps from 0,03 mm/0,04 mm/0,05 mm/0,06 mm/0,07 mm/0,08 mm/0,09 mm/0,10 mm for 3,50 Euro

and

www.woembi.de/Fuehlerlehre-003-025-9-Blatt

9 blades with this thickness stepping 0,03 mm/0,05 mm/0,08 mm/0,10 mm/0,13 mm/0,15 mm/0,18 mm/0,20 mm/0,25 mm for 4 Euro
My 1975 Z 1 B 900 Project

www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Last edit: 06 Nov 2018 15:14 by Scirocco.

Please Log in or Create an account to join the conversation.

  • gordone
  • Topic Author
  • Offline
  • Sustaining Member
More
07 Nov 2018 00:44 #793507 by gordone
Replied by gordone on topic Feeler gauge

davido wrote: Try these people. Cheap and cheerful.
www.louis.eu/artikel/feeler-gauge-9-blade-0-04-0-3-mm/10003975


Thank you, I have purchase these one now !

Thank you all for inputs !
1981 KZ650-D4, with 1981 z750L engine (Wiensco 810 big bore).

Project:
www.kzrider.com/forum/11-projects/607213...sr-1981-z750l-engine

Please Log in or Create an account to join the conversation.

  • gordone
  • Topic Author
  • Offline
  • Sustaining Member
More
12 Nov 2018 11:28 #793719 by gordone
Replied by gordone on topic Feeler gauge
I received the feeling gauge today, but these also have some gap ?
It jumps between 10 and 20, how can I measure where I`m between ?
For my engine the tolerance is 0.10 - 0.15, so I want to be close to 0,15mm ?


1981 KZ650-D4, with 1981 z750L engine (Wiensco 810 big bore).

Project:
www.kzrider.com/forum/11-projects/607213...sr-1981-z750l-engine
Attachments:

Please Log in or Create an account to join the conversation.

More
12 Nov 2018 11:41 #793721 by davido
Replied by davido on topic Feeler gauge
Put the 10 and the 5 together,or is this a trick question?
www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)
The following user(s) said Thank You: old_kaw

Please Log in or Create an account to join the conversation.

  • gordone
  • Topic Author
  • Offline
  • Sustaining Member
More
12 Nov 2018 11:46 #793723 by gordone
Replied by gordone on topic Feeler gauge
hehe

That is what I have done before also, but thought it was a bad solution 10+5 = 20 + X (since you adding two blade together = 17 ?
Oil between the blade give some extra thickness ?
1981 KZ650-D4, with 1981 z750L engine (Wiensco 810 big bore).

Project:
www.kzrider.com/forum/11-projects/607213...sr-1981-z750l-engine
The following user(s) said Thank You: old_kaw

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
12 Nov 2018 15:03 - 12 Nov 2018 15:07 #793732 by Scirocco
Replied by Scirocco on topic Feeler gauge
www.woembi.de/Fuehlerlehre-003-025-9-Blatt

9 blades with this thickness stepping 0,03 mm/0,05 mm/0,08 mm/0,10 mm/0,13 mm/0,15 mm/0,18 mm/0,20 mm/0,25 mm for 4 Euro

As i say before, I bought two sets with different steppings in case of not must adding two feeler gauge blades together to work like one feeler gauge blade only!!!
My 1975 Z 1 B 900 Project

www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
Last edit: 12 Nov 2018 15:07 by Scirocco.
The following user(s) said Thank You: gordone

Please Log in or Create an account to join the conversation.

  • gordone
  • Topic Author
  • Offline
  • Sustaining Member
More
12 Nov 2018 22:19 #793746 by gordone
Replied by gordone on topic Feeler gauge

Scirocco wrote: www.woembi.de/Fuehlerlehre-003-025-9-Blatt

9 blades with this thickness stepping 0,03 mm/0,05 mm/0,08 mm/0,10 mm/0,13 mm/0,15 mm/0,18 mm/0,20 mm/0,25 mm for 4 Euro

As i say before, I bought two sets with different steppings in case of not must adding two feeler gauge blades together to work like one feeler gauge blade only!!!


They are not shipping to Norway :(
1981 KZ650-D4, with 1981 z750L engine (Wiensco 810 big bore).

Project:
www.kzrider.com/forum/11-projects/607213...sr-1981-z750l-engine

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
12 Nov 2018 23:43 #793748 by Scirocco
Replied by Scirocco on topic Feeler gauge
PM me your shipping info and Santa Claus will do the rest.......
My 1975 Z 1 B 900 Project

www.kzrider.com/forum/11-projects/605133...ears-deep-sleep-mode
The following user(s) said Thank You: gordone, old_kaw

Please Log in or Create an account to join the conversation.

More
13 Nov 2018 08:43 #793762 by old_kaw
Replied by old_kaw on topic Feeler gauge

gordone wrote: Oil between the blade give some extra thickness ?


I always felt this to be the case too. It would be easy enough to check with a caliper or micrometer, but I never have. Whatever it might be, it would be trivial.

Wiping the feeler gauge blades clean is a must. Debris can also be stuck with the oil.

But, yes, it would be best to use the proper thickness, assuming it is the proper thickness to begin with.
1981 Kawasaki Kz1000K1
Located in the Saint Louis, Missouri Area.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

Forum Links