no crank, only when cold

  • KeylAmi!
  • Topic Author
  • Offline
  • User
  • Engineer with anxiety
More
23 Aug 2024 11:46 - 23 Aug 2024 11:46 #903595 by KeylAmi!
no crank, only when cold was created by KeylAmi!
'84 KZ700. New battery.
Went to start the bike yesterday, pressed the start button and it just clicked. The solenoid wasn't even firing. I checked connections at all the relevant connectors (except inside the headlight housing). Battery was measured at 11.8V

Do these bikes have a low voltage cutoff for the starter? I bridged the contacts on the starter solenoid, and the bike fired right up. I was not getting voltage at the trigger wires for the solenoid when holding the button. The lights on the rest of the bike dimmed very slightly when i hit the button. The clicking i heard is from something under the right side panel.

I can't currently duplicate the issue, as now that the air temp has hit 70F+, it fires every time I hit the button. I want to find the issue before needing to rely on it starting on a chilly morning. It was maybe 50F when i couldn't get it to crank with the start button.

Current project:
'84 KZ700
Last edit: 23 Aug 2024 11:46 by KeylAmi!.

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
23 Aug 2024 11:54 - 23 Aug 2024 11:57 #903596 by Wookie58
Replied by Wookie58 on topic no crank, only when cold
The lights dimming is normal due to the load on the battery (which at 11.8v is low) if you download the fault finding guide in my signature there is a generic starter circuit “test plan” towards the end 
let me know how you get on, if you are still struggling I will give you some guidance (PS if the lights dimmed without the starter operating we may need to look a little deeper)
Last edit: 23 Aug 2024 11:57 by Wookie58.

Please Log in or Create an account to join the conversation.

More
24 Aug 2024 21:49 #903643 by F64
Replied by F64 on topic no crank, only when cold
How did you measure your battery?
Was the key switch on?
Did you put the probes on the battery posts or the batter terminals?

81-KZ440-D2.
Louis Dudzik's GM HEI ignitor conversion installed 2015 s3.amazonaws.com/gpzweb/Ignition/GPZgmHEImod.html
Motogadget m-unit blue installed 2017.
LIC, NY

Please Log in or Create an account to join the conversation.

  • KeylAmi!
  • Topic Author
  • Offline
  • User
  • Engineer with anxiety
More
26 Aug 2024 04:28 #903677 by KeylAmi!
Replied by KeylAmi! on topic no crank, only when cold
apologies, i forgot about the electrical gremlin hunting guide. I tried over the weekend to find the issue. Was never able to duplicate the issue in the first place. Though i did give the battery a fresh charge earlier in the week.

F64: probes on battery posts. yes, key was switched to on.

Current project:
'84 KZ700

Please Log in or Create an account to join the conversation.

More
28 Aug 2024 13:59 #903762 by Saablord
Replied by Saablord on topic no crank, only when cold
Take off you starter solenoid and put it in the fridge or freezer. Test it on the bench (see if it clicks with 12v across the coil)

Take off your handlebar controll and clean the switch contacts.

Based on what you've said, one of these would most likely tell you what the issue is. Could still potentially be a wire or connector

Please Log in or Create an account to join the conversation.

  • KeylAmi!
  • Topic Author
  • Offline
  • User
  • Engineer with anxiety
More
09 Sep 2024 06:56 - 10 Sep 2024 05:55 #904122 by KeylAmi!
Replied by KeylAmi! on topic no crank, only when cold
Found the culprit!
It's the relay between the starter button and the starter solenoid.
I traced the clicking noise to the relay mounted in the rubber boot, under the right side panel.
I gave it a tap while holding the starter button, and everything started working. It then continued to work for the rest of the weekend.
I didnt get a chance to see if it's just dirty connector pins, or if its the relay internal contacts. I'll try to investigate, this week.

Thank you everyone for the input!

EDIT:
Took the cap off. I can see why temperature was an issue. The arms for the relay are pure copper and kind of long. So, the thermal expansion/contraction was shifting the contact alignment to a "burnt" spot when cold. I sanded the face of the contacts with some 1500.
Put the relay in the freezer for an hour, followed by re-testing on bike while still cold, and as it warmed up. Success! I disconnected the heavy wires going to the starter while testing, but the starter solenoid fired each time i tested it.
I wonder if i can find a more reliable (different internal design?) relay that is plug and play.

Current project:
'84 KZ700
Last edit: 10 Sep 2024 05:55 by KeylAmi!. Reason: Followup
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
11 Sep 2024 17:59 #904237 by Saablord
Replied by Saablord on topic no crank, only when cold
Starter relay and solenoid? Did they change the design from older bikes? I thought it was just one starter solenoid triggered directly by the starter button.

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
11 Sep 2024 23:48 #904243 by Wookie58
Replied by Wookie58 on topic no crank, only when cold
Do you have a wiring diagram for the 700 (none of the earlier diagrams I have looked at have an additional relay)

Please Log in or Create an account to join the conversation.

  • KeylAmi!
  • Topic Author
  • Offline
  • User
  • Engineer with anxiety
More
12 Sep 2024 03:58 - 12 Sep 2024 03:59 #904247 by KeylAmi!
Replied by KeylAmi! on topic no crank, only when cold


It has a "starter control relay" per the diagram. one of these:  www.partzilla.com/product/kawasaki/27002-1051

Current project:
'84 KZ700
Last edit: 12 Sep 2024 03:59 by KeylAmi!. Reason: added image

Please Log in or Create an account to join the conversation.

  • Wookie58
  • Away
  • Moderator
More
12 Sep 2024 05:06 #904249 by Wookie58
Replied by Wookie58 on topic no crank, only when cold
Carry out the below checks and let me know how you get on

The following user(s) said Thank You: KeylAmi!

Please Log in or Create an account to join the conversation.

  • KeylAmi!
  • Topic Author
  • Offline
  • User
  • Engineer with anxiety
More
12 Sep 2024 05:19 #904251 by KeylAmi!
Replied by KeylAmi! on topic no crank, only when cold
somebody has definitely been messing around.
The bike starts with the clutch out. the kickstand switch has also been removed. heck, it's even got a car horn behind the seat under the plastic!

to be clear, the issue has been resolved. after cleaning the contacts and putting the relay back together, it starts just fine in the cold.

Current project:
'84 KZ700
The following user(s) said Thank You: Wookie58

Please Log in or Create an account to join the conversation.

More
12 Sep 2024 08:54 - 12 Sep 2024 10:42 #904256 by wim2584
Replied by wim2584 on topic no crank, only when cold
I have some issue with the starter, cracks the engine when cold (slowly), but when engine warm, sometimes no cracking, Today I put a other (revised) starter inside, now problems are solved, good starting cold and hot, also the starting rpm is much higher.
I made a scope grap of the current and voltage during start (with the new starter), see attachment 

owner of a Kawasaki Z440, 1982.
built from two Kawasaki's 1983 gemany, and a 1982 from Netherlands.
elektrical/electronical engineer, with mechanic as hobby
Last edit: 12 Sep 2024 10:42 by wim2584.
The following user(s) said Thank You: howardhb

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum