Handlebar switches

Hi Clay, I have had a rough measure at 26”, so 28” will work fine 👍

Hey, haven't forgotten. Looking for the cheapest rates for shipping. Doing the work is pedestrian, finding a courier is a whole different bag.

What's Your Postcode?

asphalt900 wrote:

What's Your Postcode?

Clay I know you don't do "tech" but probably best to exchange personal details by email rather than publicly on the forum (remember it's not just members that can see posts)

Wookie58 wrote:

asphalt900 wrote:

What's Your Postcode?

Clay I know you don't do "tech" but probably best to exchange personal details by email rather than publicly on the forum (remember it's not just members that can see posts)

Hi Wookie, I have sent Clay a PM, so hopefully he can get it 👍

Some pics Rich. Seems my old little camera takes better photos then my "smart" phone. Finished out the "ready to apply" one with proper 4mm male terminals with sleeving.     

Really nice work Clay

asphalt900 wrote:

Some pics Rich. Seems my old little camera takes better photos then my "smart" phone. Finished out the "ready to apply" one with proper 4mm male terminals with sleeving. 

 

 

Looking great Clay 👍👍👍

Considering where the starting point was, yes, keen. Really just have to have stuff to rummage thru, this i have. A little from that box, little more     from another and before ya know it..gathering is complete.

Its always a pleasure to see your fine and detailed work on swithes, tach and so on,..Craftmansship at its best!!

Thank-You Joe, i revel in authenticity. Just my bag i suppose. Some last pics Rich before i bag/tag and post. Shown is the starter of what You'll need if in case you need another. All the stuff is within, fully functional sans wiring and sheath. I just truly wish Asahi Denso (AD) had maintained the material used on the earlier Hi/Lo switch. Earlier ones were almost indestructible, black plastic. They changed to the brittle translucent ones starting in 1976. They are a bear because they "snap-off" and even NOS ones are so paltry they too crack. Anyhoot, ones you'll receive are fully intact. Straight breadboard and selector, just have to be handy with a pencil soldering iron. Groovy..