Saving a '81 KZ750-E

Replied by Skidmark on topic Saving a '81 KZ750-E

A bit more cleaning and I can start the masking on all the mating surfaces.

The block and head hve been at this point for quite a while, now.

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

The top end is almost sealed. All of the side/case covers require cleaning before they get put on. Still need to cap off the valve cover vents, intake/exhaust ports.

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

I am using all of the old hardware and studs at this point. Final assembly will with APE studs and stainless case screws.

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

I am going to use PJ1 engine and case paint (rattle can). I have not found a heat resistant semigloss clear yet. They have the good stuff in the EU, but they are not allowed to ship it to the US. Since I plan on exposing the aluminum (fins, text, cam cover ends) I wanted to put a couple coats of clear on it.

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Replied by Mikaw on topic Saving a '81 KZ750-E

---

1976 KZ 900 A4 kzrider.com/forum/11-projects/613548-1976-kz-900-a4
1976 KZ 900 B1 LTD
1978 KZ 1000 B2 LTD
1980 KZ 750 E1
Kowledge Speaks, But Wisdom Listens.
Jimi Hendrix.

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

Cleaning all the gasket surfaces is getting very time consuming. The final assembly will go quicker than this, I bet! Slowly getting closer to trying to lift this thing into my blast cabinet. I hope I have enough room to move the gun around with it in there...

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.

Please Log in or Create an account to join the conversation.

Replied by Skidmark on topic Saving a '81 KZ750-E

You can see the blast cabinet against the wall. I think it will be too tight a fit to spin around in there! Good idea, though. I will need to put it in and take it out for repositioning several times. It's not the biggest cabinet, for sure.

---

Retired gearhead
'81 KZ-750 E2
'87 Suzuki Savage 650 Street Tracker (lost in the shop fire)

Please Log in or Create an account to join the conversation.