KZR's Bikes of the Month for 2024

Drag strip trip.

More
19 Jan 2016 14:28 #707292 by zukdave
Replied by zukdave on topic Drag strip trip.
Been thinking about how to deal with the wheelie issue I really
don't want to put the bar back on and talking with a few buddy's they all say
put shock's back on it so I'm gonna rework the lower mount's and and see how it work's.

Not got a clue right now about spring rate or dampening so I think I'm going to use the stock ZRX
shock's I have to get a base line setup.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
23 Jan 2016 06:34 #707727 by kawi810
Replied by kawi810 on topic Drag strip trip.
looks like Gumpy G is going to make more lock up clutch kits available.that should finish off your drag bike.
original owner of a 1984 gpz 750
1985 turbo 750 stock, being restored.
1984 gpz 750 with 810 cc wiesco's megacycle cams(471-10) 34 mm flatslides v&h pipe ported head dyna ignition. bottom end, crank case from turbo 750 and sprockets.

Please Log in or Create an account to join the conversation.

More
24 Jan 2016 10:24 #707880 by zukdave
Replied by zukdave on topic Drag strip trip.

kawi810 wrote: looks like Gumpy G is going to make more lock up clutch kits available.that should finish off your drag bike.


I'll have to check into that thanks.

Can't go run the bike right now so I'll get my fix with grudge race video's
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
28 Jan 2016 14:12 #708400 by zukdave
Replied by zukdave on topic Drag strip trip.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
30 Jan 2016 14:21 #708613 by zukdave
Replied by zukdave on topic Drag strip trip.
All you folk's that have been following this thread I want to say THANK YOU !!!!!!!

When I started it I didn't think about it lasting for what coming up on four year's now
and reaching 35,000 + view's it was just me talking about taking the GPz motor swap to the track for the first
and has turned into the history of me drag racing this little bike.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
30 Jan 2016 14:30 #708615 by SWest
Replied by SWest on topic Drag strip trip.
Those of us that don't have the opportunity to do like following the ones that can. Keep it going. :cheer:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
30 Jan 2016 14:33 #708616 by KZB2 650
Replied by KZB2 650 on topic Drag strip trip.
Love it ....A crap load of those views are from me I'm thinkin ...... has been my go to thread when I'm bored or need some insperation .....started looking through it again the other day and got to page 10 I think it was..... will finish it off again soon I'm sure.
1978 KZ650 b-2
700cc Wiseco kit 10 to 1.
1980 KZ750 cam, ape springs, stock clutch/ Barnett springs.
Vance and Hines Header w/ comp baffle and Ape pods, Dyna S and green coils, copper wires.
29MM smooth bores W/ 17.5 pilots, 0-6s and 117.5 main
16/42 gearing X ring chain and alum rear JT sprocket.

Please Log in or Create an account to join the conversation.

More
30 Jan 2016 15:08 - 30 Jan 2016 15:10 #708621 by zukdave
Replied by zukdave on topic Drag strip trip.

KZB2 650 wrote: ..started looking through it again the other day .


I did that the other night and read it all it's cool to go back and see how the bike's changed over the year's.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 30 Jan 2016 15:10 by zukdave.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
30 Jan 2016 15:46 #708625 by SWest
Replied by SWest on topic Drag strip trip.
Wish I wasn't so camera shy back in the day. I'd love to have shots of the bike as she and I changed. :dry:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

More
30 Jan 2016 16:16 #708629 by zukdave
Replied by zukdave on topic Drag strip trip.
Going back isn't just seeing how the bike changed for me I know the back story
for every pic. I've posted.
Remembering all the after racing campin at the track, beer drinking, bbq and shit talkin
around a camp fire.
1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
30 Jan 2016 16:20 #708630 by SWest
Replied by SWest on topic Drag strip trip.
The three B's. Beef, beer and brandy sitting around the camp fire. :woohoo:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
30 Jan 2016 16:21 #708631 by SWest
Replied by SWest on topic Drag strip trip.
Oh and howling at the moon. :lol:
Steve
Z1b1000 1975 Z1b
kzrider.com/forum/11-projects/598262-kz-...-will-it-live#672882
kzrider.com/forum/2-engine/597654-poser?start=240#704229

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.