KZR's Bikes of the Month for 2024

Drag strip trip.

More
03 Dec 2015 15:09 #701769 by zukdave
Replied by zukdave on topic Drag strip trip.
Got the bike out after work tonight and made a few WFO runs down the street
and at wide open throttle it's working great..
Tomorrow I'm gonna check the output voltage on the tach for the shift light
and see if I can use it to trigger the shifter relay.

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • Street Fighter LTD
  • Away
  • Moderator
  • TURBO, Its Better to be Blown than Injected
More
03 Dec 2015 15:23 #701772 by Street Fighter LTD
Replied by Street Fighter LTD on topic Drag strip trip.
You Go Dave !!!!


Original owner 78 1000 LTD
Mr Turbo Race Kit, MTC 1075 Turbo pistons by PitStop Performance , Falicon Ultra Lite Super Crank, APE everything. Les Holt @ PDM's Billet Goodies . Frame by Chuck Kurzawa @ Logghe Chassis . Deep sump 5qt oil pan. RIP Bill Hahn

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
03 Dec 2015 15:54 #701776 by z1kzonly
Replied by z1kzonly on topic Drag strip trip.
Just another dragbike (not many of them) But something to compare to!
Craigslist in Buffalo, NY
buffalo.craigslist.org/mcy/5339276562.html

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Attachments:

Please Log in or Create an account to join the conversation.

More
03 Dec 2015 20:36 #701812 by zukdave
Replied by zukdave on topic Drag strip trip.
Either it's slow as hell or my junk's flyin. Said 6.99@100 I've gone 7.34@98.73
3 1/2 tenth's quicker but only one mph faster. don't sound right.

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
04 Dec 2015 15:35 #701950 by zukdave
Replied by zukdave on topic Drag strip trip.
Checked the shift light out put and it looks like the tach powers up the light constantly
and use's a ground signal to turn the light on so swapped some wires around
but couldn't get it to work right kept blowing the ign. fuse it'd shift one time and pop the fuse.
I'm thinking it has to do with the way I've got the two relays tied together with one
applying 12 volt pos. and the other applying a ground so just put it back like it worked
and I'll just button shift it off the light tomorrow.

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
05 Dec 2015 15:22 #702055 by rstnick
Replied by rstnick on topic Drag strip trip.
Happy racing Dave.
B)

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project

Please Log in or Create an account to join the conversation.

More
05 Dec 2015 17:05 #702064 by zukdave
Replied by zukdave on topic Drag strip trip.

rstnick wrote: Happy racing Dave.
B)


Not today looks like I just can't ride this thing on two wheels.
Launching with my chin on the tach, tits on the tank, feet behind the bike flappin
like a baggy in the wind,and sliding the clutch 40 feet out this damn thing still wants to ride wheelies.
I give up I'm going back to the bar.

I just got home I'll do a race report in the morning.

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

More
07 Dec 2015 13:53 - 07 Dec 2015 13:56 #702326 by zukdave
Replied by zukdave on topic Drag strip trip.
I shoulda packed a new battery bike would start just fine cold then ride it to the
staging lanes and it wouldn't restart when warm. Push start and make a pass
get back to my pit let it sit and cool down it'd fire up then not restart in the staging lanes.

I get back to my shop taht night bike still won't start when I unloaded it go back Sunday morning
to finish unloading the van flip the switch on hit the start button motor turns over about two times and
fires up no problem F'in battery.
[IMG

[IMG

[IMG

[IMG

[IMG

[IMG

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.
Last edit: 07 Dec 2015 13:56 by zukdave.

Please Log in or Create an account to join the conversation.

More
07 Dec 2015 14:02 #702327 by zukdave
Replied by zukdave on topic Drag strip trip.
URL=http://s1276.photobucket.com/user/Zukisbikes/media/042_zpsqtfzlpjq.jpg.html] [/URL]
[IMG

[IMG

[IMG

[IMG

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • SWest
  • Offline
  • Sustaining Member
  • 10 22 2014
More
07 Dec 2015 14:47 #702329 by SWest
Replied by SWest on topic Drag strip trip.
Too bad about the battery. How'd you do otherwise?
Steve

Please Log in or Create an account to join the conversation.

More
07 Dec 2015 14:56 #702330 by zukdave
Replied by zukdave on topic Drag strip trip.
First round I had to keep the bike running in the staging lanes and it got hot and slowed down 2.5 tenths
and I got put out by 2.4 tenths. I could have bought back in but said F$%k it I'm not gonna take the chance of cookin
my motor and drank beer..

1980 KZ650 F1
ZX750A1 motor.
Wiseco 810cc kit.
Zukiworks racing ported head.
VM 29 smooth bore's.
Dyna 2000 Ign. w/Dyna mini coil's
APE cylinder stud's and nut's.
APE valve spring's.
APE Track King clutch.
V/H KZ1000 sidewinder.
3.5x18 laced to a KZ1000 disk hub.
150/60/18 Shinko 006 Podium.
63" wheel base.

Please Log in or Create an account to join the conversation.

  • z1kzonly
  • Offline
  • User
  • Sustaining Member
More
07 Dec 2015 15:22 #702337 by z1kzonly
Replied by z1kzonly on topic Drag strip trip.
Hang in there Dave! You are doin' it! Others ain't! I would love to be out there, losing 1st round or even red lighting! Still great! & Cool!
At least you are there! That's what it is all about. You'll get it dialed in. You will be all set next season.
Keep at it! I've been there. I have not been on a drag bike at a strip in about 15 years! I miss the hell out of it!

Livin in "CheektaVegas, NY
Went thru 25 of these in 40 yrs.
I SOLD OUT! THE KAW BARN IS EMPTY.
More room for The Old Girl, Harley 75 FLH Electra Glide,
Old faithful! Points ign. Bendix Orig. carb.
Starts everytime!

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.