Dutch 1977 Z1000 Build

More
25 Mar 2017 09:36 #757621 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
It is not getting any better.
It seems that everything from the cam chain is worn.



The tensioner is done and I guess the roller will look the same.
And why are these part so expensive compared to the rest of the bike?
Probably better to also put in a new chain?

Eric
Attachments:

Please Log in or Create an account to join the conversation.

  • DoctoRot
  • Offline
  • Sustaining Member
  • Oh, the usual... I bowl, I drive around...
More
25 Mar 2017 14:30 - 25 Mar 2017 14:32 #757648 by DoctoRot
Replied by DoctoRot on topic Dutch 1977 Z1000 Build
Its pretty common to have the cam chain components be pretty worn. Replacing the cam chain is probably not a bad idea but that requires splitting the cases. you can measure your cam chain and see if its within spec before you decide to do that. The only reason I can see that these parts are so expensive is they have pretty small tolerances, and precision machining of a complex part is not cheap. Also I would replace the little rubber blocks that hold the rollers and such in place. They are likely really hard and can prevent the cylinders or head from sealing all the way if you reuse them.
Last edit: 25 Mar 2017 14:32 by DoctoRot.

Please Log in or Create an account to join the conversation.

  • Scirocco
  • Offline
  • Premium Member
  • Never change a running system
More
25 Mar 2017 14:57 #757652 by Scirocco
Replied by Scirocco on topic Dutch 1977 Z1000 Build
I do a quick shopping list
The two Idler Assy sprockets are the expensive part of all needed parts

www.cmsnl.com/kawasaki-z1b-1975-usa-cana...t/61209.html#results



Price for Germany and Netherlands = 887,15 EURO



Price for Isle of Man = 745,50 EURO ( no taxes )!!!!

Michael
Attachments:
The following user(s) said Thank You: GPz550D1

Please Log in or Create an account to join the conversation.

More
26 Mar 2017 04:02 #757717 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Hi DoctoRot,
I don't want to split the case so I hope the chain is still within limits.
Now i have to find theses limits and how to measure it.
And I am planning to replace all the rubber components because they are all hard and dried out.(and broken )

Scirocco,
You are always fast with finding parts :lol:
I also found these parts in Holland but more expensive, luckily I am going to the states again in a week and it still saves me some money when I pick it up there.
But the big money saver is, if I buy the other brand (I think it is Liska) they are not as well damped as the original Kawasaki parts but half the price.

or these from PMC

Anyone has experience with these?
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Mar 2017 12:42 #757750 by davido
Replied by davido on topic Dutch 1977 Z1000 Build
Go for a riveted chain.No splitting the cases.Jan Smit put one in mine and hes been building drag race bikes for years,so,I reckon he knows his onions.Makes no sense spending the money on a new sprocket and not doing the chain as well.False economy.
The bike looks great by the way.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
26 Mar 2017 13:27 #757752 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
Hi David thanks,
Going to measure the chain tomorrow .
What has Jan Smit done on your engine?
I had not planned doing it myself but the more I read on this forum and the more I take things apart the more I learn.
But now the weather is getting better I want to stop learning and start riding :) .
How is your bike? last thing I read you where taking it to a dyno.

Eric

Please Log in or Create an account to join the conversation.

More
26 Mar 2017 23:18 #757782 by davido
Replied by davido on topic Dutch 1977 Z1000 Build
Hey Eric
I took my motor to Jan for a rebore and new pistons (Wiseco).He also refreshed the head and fitted a new chain. I had stripped the engine myself and was also planning to rebuild it but he offered to put it together for a very good price,so I went with that.
The bike is up near Heerhugowaard at the moment,at a shop with a dyno. I called last week and its pretty much ready.The carbs are set up and its running good,Im told. The ignition was a bit of a mess so he sorted that. I should be able to collect it this week ( great if this weather continues).Ill do an update when I get it .
I have heard of a place near Zeeland,which has a dyno (closer to you than Heerhugowaard) I can find the name/address if youre interested

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
27 Mar 2017 01:44 - 27 Mar 2017 01:44 #757785 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
David you have PM
Last edit: 27 Mar 2017 01:44 by Wiers.

Please Log in or Create an account to join the conversation.

More
27 Mar 2017 03:05 #757786 by davido
Replied by davido on topic Dutch 1977 Z1000 Build

Wiers wrote: David you have PM

?? No I dont!

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
27 Mar 2017 03:24 #757787 by Wiers
Replied by Wiers on topic Dutch 1977 Z1000 Build
yes you have :laugh: (at least it shows that I send it twice)

Please Log in or Create an account to join the conversation.

More
27 Mar 2017 14:25 #757848 by davido
Replied by davido on topic Dutch 1977 Z1000 Build
Yes! Found it. Reply sent.

www.kzrider.com/forum/11-projects/594313-csr1000-project-build
CB550 (1978)
CB500/4 (1972)*
KZ1000CSR (1981)
XT 600E (1999)
TDM900 (2003)

Please Log in or Create an account to join the conversation.

More
27 Mar 2017 15:50 #757866 by GPzMOD750
Replied by GPzMOD750 on topic Dutch 1977 Z1000 Build
OK, I've been gone awhile and I'm sorry this might be a little belated but.....

Where did the hugger fender come from? I'd like to do something similar to my GPZ750 and that almost looks like what I was thinking about.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum