Which one do you prefer?

More
07 Aug 2012 18:15 - 07 Aug 2012 18:20 #541227 by les holt
Replied by les holt on topic Which one do you prefer?
Couple more.

Attachment shifterrearset3.jpg not found



Attachment shifterrearset4.jpg not found



Les
Attachments:
Last edit: 07 Aug 2012 18:20 by les holt.

Please Log in or Create an account to join the conversation.

More
07 Aug 2012 18:45 #541230 by Patton
Replied by Patton on topic Which one do you prefer?
Would it be feasible to have the shift rod under the pedal? :unsure:



Good Fortune! :)

1973 Z1
KZ900 LTD
Attachments:

Please Log in or Create an account to join the conversation.

More
07 Aug 2012 19:34 #541241 by les holt
Replied by les holt on topic Which one do you prefer?
I have mine going under and it's tight, rubs in a couple spots. If I could find the right donor shifter arm for the motor it may be more feasible. I have these setup now where it uses the same lever for both brake and shifter, cut down on programming and setups which helps on keeping the price reasonable.

Please Log in or Create an account to join the conversation.

More
07 Aug 2012 22:07 #541272 by rstnick
Replied by rstnick on topic Which one do you prefer?
Have a look at what this place has to offer in connections:

www.midwestcontrol.com/

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, Progressive Suspension, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s

Please Log in or Create an account to join the conversation.

  • mark1122
  • Offline
  • User
  • Keep twisting it
More
07 Aug 2012 22:21 #541278 by mark1122
Replied by mark1122 on topic Which one do you prefer?
I think youve got it right Les.
fewer obstetricals when run on top.
well done. they look very Pro. :)

76 KZ, frame gusset work,1200CC.Ported by Larry Cavanaugh, 1.5mm.over intakes, Carron Pipe, ZRX12 rear end, and seat,96zx9 front end.
01 CBR600F4i Track bike.
Cobourg, Ont. Can.

~ ~ ~_@
~ ~ _- \,
~ (k) / (z)

Please Log in or Create an account to join the conversation.

More
07 Aug 2012 22:33 #541289 by kaw-a-holic
Replied by kaw-a-holic on topic Which one do you prefer?
I agree with Mark1122, IMO you have it right on top.

Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 13:24 - 08 Aug 2012 13:29 #541366 by les holt
Replied by les holt on topic Which one do you prefer?
Here's the shifter side on my bike, I used a 07/08 ZX6 shifter link modified. I've order an 84-86 gpz shifter link to try.
Attachments:
Last edit: 08 Aug 2012 13:29 by les holt.

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 13:35 - 08 Aug 2012 16:30 #541370 by les holt
Replied by les holt on topic Which one do you prefer?
Okay, now the fun stuff, I want 5 people to try these for fit, finish, and overall performance with feedback. Any issues, I'll correct and make adjustments as necessary. All the bolts are 18-8 stainless.


Attachment rearsetsbeforeassy.jpg not found




Les
Attachments:
Last edit: 08 Aug 2012 16:30 by Patton.

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 14:08 - 08 Aug 2012 16:30 #541373 by kaw-a-holic
Replied by kaw-a-holic on topic Which one do you prefer?

les holt wrote: Okay, now the fun stuff, I want 5 people to try these for fit, finish, and overall performance with feedback. Any issues, I'll correct and make adjustments as necessary. All the bolts are 18-8 stainless.


Attachment rearsetsbeforeassy.jpg not found




Les

I'm in Les. Will send you a PM.

Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project
Last edit: 08 Aug 2012 16:30 by Patton.

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 14:17 #541374 by les holt
Replied by les holt on topic Which one do you prefer?
Just to clarify, You need to use the ZX6 master cylinder. Also, I haven't tested the gpz shifter arm so I won't know if it is the correct one to suggest to use. There are many different ones that fit.

Les

Please Log in or Create an account to join the conversation.

More
08 Aug 2012 14:23 #541376 by kaw-a-holic
Replied by kaw-a-holic on topic Which one do you prefer?

les holt wrote: Just to clarify, You need to use the ZX6 master cylinder. Also, I haven't tested the gpz shifter arm so I won't know if it is the correct one to suggest to use. There are many different ones that fit.

Les

Not a big deal. You have done all the hard work. I can use all thread with ends as a temp if needed.

Jon
1977 KZ1000a1
Mesa, AZ
Phoenix Fighter Project

Please Log in or Create an account to join the conversation.

More
09 Aug 2012 01:52 #541513 by NakedFun
Replied by NakedFun on topic Which one do you prefer?
If you want I can help mock it up on a '76 I am building and send you any kind of data you need. I also have ZRX masters and ZRX shift arm.

Cory

2008 Kawasaki Concours 14
1999 Kawasaki ZRX1100
1976 Kawasaki KZ900

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum